Electrochemical promotion of Pt catalysts for gas phase reactions
Related publications (244)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The electrochem. oxidn. of EDTA was studied at boron-doped diamond (BDD) electrodes. Cyclic voltammetry in the potential region of water stability showed that EDTA is oxidized in an irreversible 2-electron-transfer mechanism. No fouling phenomena were noti ...
The limited electrode density and thus, the limited spatial resolution of substrate-integrated microelectrodes arrays (MEAs) used in in-vitro electrophysiology are currently considered as the main constraints of this technique. By taking advantage of the c ...
The electrochem. oxidn. of chloranilic acid (CAA) was studied in acidic media at Pb/PbO2, B-doped diamond (Si/BDD) and Ti/IrO2 electrodes by bulk electrolysis expts. under galvanostatic control. The obtained results have clearly shown that the electrode ma ...
Aluminum is produced by the electrolytic reduction of alumina dissolved in molten cryolite. This process requires carbon anodes which are consumed during the electrolysis. The anodes contribute roughly with 15% to the total aluminum production cost. If the ...
We present a method for the production of nanoelectrodes using focussed ion beam techniques (FIB). The electrodes utilise nanometric holes milled in a silicon nitride based pasivation layer, followed by wet etching of a silicon oxide based pasivation layer ...
In the search for a good dimensionally stable anode-type electrode, p-silicon (1-3 mW cm) has been chosen as the substrate material due to its high anodic stability and its reasonable cost compared to titanium and tantalum. Several p-Si/IrO2 electrodes hav ...
We discuss our recently proposed mechanism for the electro-oxidation/reduction on Pt(111) surfaces (J. Electroanal. Chem. 2002, 537, 7) in the presence of sulfuric acid. The bisulfate ion has a large dipole moment and is strongly adsorbed on the positive e ...
The aim of this work has been to design, and fabricate a miniaturized electrospray-type interface for mass spectrometry analysis, which allows the nebulization of solutions by applying a high potential difference between the source and the mass spectromete ...
Diamond films with different levels of doping have been the subject of applications and fundamental research in electrochemistry, opening up a new branch known as the electrochemistry of diamond. The electrochemical properties of diamond mostly depend on t ...
A review is given on the so-called electrochem. promotion (EP) denoting an elec. controlled modification of the activity and/or selectivity of a heterogeneous catalyst. Efficient EP in dispersed catalyst systems can be achieved using porous solid-electroly ...