Advanced virtual reality technologies for surveillance and security applications

Renaud Ott, Daniel Thalmann, Frédéric Vexo
2006
Conference paper

Abstract

We present a system that exploits advanced Virtual Reality technologies to create a surveillance and security system. Surveillance cameras are carried by a mini Blimp which is tele-operated using an innovative Virtual Reality interface with haptic feedback. An interactive control room (CAVE) receives multiple video streams from airborne and fixed cameras. Eye tracking technology allows for turning the user's gaze into the main interaction mechanism; the user in charge can examine, zoom and select specific views by looking at them. Video streams selected at the control room can be redirected to agents equipped with a PDA. On-field agents can examine the video sent by the control center and locate the actual position of the airborne cameras in a GPS-driven map. The PDA interface reacts to the user's gestures. A tilt sensor recognizes the position in which the PDA is held and adapts the interface accordingly. The prototype we present shows the added value of integrating VR technologies into a complex application and opens up several research directions in the areas of tele-operation, Multimodal Interfaces, etc. Copyright © 2006 by the Association for Computing Machinery, Inc.

Official source

https://infoscience.epfl.ch/record/99027?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

Advanced Mixed Reality Technologies for Surveillance and Risk Prevention Applications

Renaud Ott, Patrick Salamin, Daniel Thalmann, Frédéric Vexo

We present a system that exploits advanced Mixed and Virtual Reality technologies to create a surveillance and security system that could be also extended to define emergency prevention plans in crowdy environments. Surveillance cameras are carried by a mini Blimp which is tele-operated using an innovative Virtual Reality interface with haptic feedback. An interactive control room (CAVE) receives multiple video streams from airborne and fixed cameras. Eye tracking technology allows for turning the user’s gaze into the main interaction mechanism; the user in charge can examine, zoom and select specific views by looking at them. Video streams selected at the control room can be redirected to agents equipped with a PDA. On-field agents can examine the video sent by the control center and locate the actual position of the airborne cameras in aGPS-driven map. The aerial video would be augmented with real-time 3D crowd to create more realist risk and emergency prevention plans. The prototype we present shows the added value of integrating AR/VR technologies into a complex application and opens up several research directions in the areas of tele-operation, Multimodal Interfaces, simulation, risk and emergency prevention plans, etc.

2006

In this work, we propose new ways to employ 3D-ranging systems in advanced human-computer interfaces and show that they can be used for precise hand-tracking systems aiming at virtual keyboard or mouse applications. We first implement a Structured Light (SL) based 3D-ranging system as the testbed for acquiring depth information. The ranging system uses an off-the-shelf projector combined with an industrial color camera, where the projector projects well-designed line patterns onto the scene and the camera captures the reflected light from the scene and the target. The depth information is recovered from the deformed line pattern and the pre-calibrated projector-camera system. With this system we can capture dense depth maps with moderate resolution and high frame rate as the simulated input to the hand-tracking system. We then explore an approach to 3D hand matching that combines a detailed 3D hand model (skeletal + polygonal model) with a Physical-based Model Fitting technique (PMF). Virtual forces are assigned between the depth measurements and the polygonal vertices of the model. The matching problem is formulated as the minimization of the distances between the measurement and the model surface with the guidance of virtual forces. This can employ 3D information simply and directly onto the parameter space, and yield good results under challenging conditions. To demonstrate the effectiveness of the approach we show that we can track hand motions such as typing or grasping frame by frame. The major limitation of this method is that it requires a good initialization of the hand model and the computation time to achieve convergence with good fitting results is quite long. We therefore investigated more complex hand models and feature-based matching techniques. A three-level hand model (skeletal + primitive + polygonal model) is proposed for the Multi-Level Feature Matching approach (MLFM). The matching is carried out from the bottom to top levels of different hand presentations, and distinctive features for each level extracted from both the measurements and the model are matched with Scaled Conjugate Gradient method (SCG). The matching result from lower level is used as the initial state of the model parameters for higher level matching. This hierarchical structure speeds up the optimization process and enhances the precision of the matching result. We demonstrate our approach with the same hand motion as in the previous method and compare the performance of these two methods. We show that the MLFM method is faster and more robust to hand occlusions than the PMF method. Finally, we present a more powerful approach based on the Back-Constrained Gaussian Process Latent Variable Model (BC-GPLVM) that import prior information of categorized hand motion such as typing. BC-GPLVM provides a low-dimensional embedding of hand motion data, with a density function that gives higher probability to gestures and motions close to normal typing motion. This model is learned from a small set of clusters of vast captured motion data. The prior model is then combined with the previous multi-level models and features to generate a uniform cost function for optimization. We show the tracking result to demonstrate that this method can be used for human-computer interfaces requiring precise 3D hand tracking.

EPFL2008

Quantitative Comparison of Commercial CCD and Custom-Designed CMOS Camera for Biological Applications

René Beuchat, Sandro Carrara, Giovanni De Micheli, Julien Michel Ghaye, Gözen Köklü, Yusuf Leblebici

In biological applications and systems where even the smallest details have a meaning, CCD cameras are mostly preferred and they hold most of the market share despite their high costs. In this paper, we propose a custom-designed CMOS camera to compete with the default CCD camera of an inverted microscope for fluorescence imaging. The custom-designed camera includes a commercially available mid-performance CMOS image sensor and a Field-Programmable Gate Array (FPGA) based hardware platform (FPGA4U). The high cost CCD camera of the microscope is replaced by the custom-designed CMOS camera and the two are quantitatively compared for a specific application where an Estrogen Reception (ER) expression in breast cancer diagnostic samples that emits light at 665nm has been imaged by both cameras. The gray-scale images collected by both cameras show a very similar intensity distribution. In addition, normalized white pixels after thresholding resulted in 4.96% for CCD and 3.38% for CMOS. The results and images after thresholding show that depending on the application even a mid-performance CMOS camera can provide enough image quality when the target is localization of fluorescent stained biological details. Therefore the cost of the cameras can be drastically reduced while benefiting from the inherent advantages of CMOS devices plus adding more features and flexibility to the camera systems with FPGAs.

2012

EPFL2008