Publication

Distance preserving flattening of surface sections

Roger Hersch, Laurent Saroul
2006
Journal paper
Abstract

Curved cross-sections extracted from medical volume images are useful for analyzing nonplanar anatomic structures such as the aorta arch or the pelvis. For visualization and for performing distance measurements, extracted surface sections need to be adequately flattened. We present two different distance preserving surface flattening methods which preserve distances according to a user-specified center of interest and according to user-specified orientations. The first method flattens surface sections by preserving distances along surface curves located within planes having a user specified constant orientation. The second method flattens surfaces along curves located within radial planes crossing the center of interest. We study and compare the properties of the two flattening methods by analyzing their distortion maps. Thanks to a multiresolution approach, we provide surface flattening at interactive rates, allowing users to displace their focus point while visualizing the resulting flattened surface. These distance preserving flattening methods provide new means of inspecting curved cross-sections extracted from medical images

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Ontological neighbourhood
Related concepts (33)
Map projection
In cartography, a map projection is any of a broad set of transformations employed to represent the curved two-dimensional surface of a globe on a plane. In a map projection, coordinates, often expressed as latitude and longitude, of locations from the surface of the globe are transformed to coordinates on a plane. Projection is a necessary step in creating a two-dimensional map and is one of the essential elements of cartography. All projections of a sphere on a plane necessarily distort the surface in some way and to some extent.
Meridian arc
In geodesy and navigation, a meridian arc is the curve between two points on the Earth's surface having the same longitude. The term may refer either to a segment of the meridian, or to its length. The purpose of measuring meridian arcs is to determine a figure of the Earth. One or more measurements of meridian arcs can be used to infer the shape of the reference ellipsoid that best approximates the geoid in the region of the measurements.
Geographical distance
Geographical distance or geodetic distance is the distance measured along the surface of the earth. The formulae in this article calculate distances between points which are defined by geographical coordinates in terms of latitude and longitude. This distance is an element in solving the second (inverse) geodetic problem. Calculating the distance between geographical coordinates is based on some level of abstraction; it does not provide an exact distance, which is unattainable if one attempted to account for every irregularity in the surface of the earth.
Show more
Related publications (32)

Umbrella Meshes: Elastic Mechanisms for Freeform Shape Deployment

Mark Pauly, Florin Isvoranu, Uday Kusupati, Tian Chen, Yingying Ren, Davide Pellis

We present a computational inverse design framework for a new class of volumetric deployable structures that have compact rest states and deploy into bending-active 3D target surfaces. Umbrella meshes consist of elastic beams, rigid plates, and hinge joint ...
2022

Verification of selective laser melting heat source models with operando X-ray diffraction data

Helena Van Swygenhoven, Steven Van Petegem, Samy Hocine

The output obtained from operando X-ray diffraction experiments on Ti-6Al-4V is used to verify the accuracy of four FEM models in predicting the temperature evolution of the solidified domain, the cooling rates of the alpha and beta phases, and the influen ...
ELSEVIER2021

Generation of elastic geodesic gridshells with anisotropic cross sections

Corentin Jean Dominique Fivet, Nicolas Robin Montagne, Olivier Baverel

Geodesic gridshells are shell structures made of continuous elements following geodesic lines. Their properties ease the use of beams with anisotropic cross-sections by avoiding bending about their strong axis. However, such bending may arise when flatteni ...
2021
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.