Publication

The role of twist and crimp on the vibration behaviour of flax fibre composites

Related publications (31)

Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

Véronique Michaud, Jacobus Gerardus Rudolph Staal, Baris Çaglar

Frontal polymerisation has the potential to bring unprecedented reductions in energy demand and process time to produce fibre reinforced polymer composites. Production of epoxy-based fibre reinforced polymer parts with high fibre volume content, commonly e ...

2024

Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions

Congzhe Wang

Fiber-polymer composites consist of a polymer matrix and reinforcing fibers made of various materials. These composites exhibit exceptional properties, such as a high strength-to-weight ratio and excellent corrosion resistance, which has led to their incre ...

EPFL2024

On the influence of flow-front orientation on stringer stiffened composite panels in water impacts

Véronique Michaud

Water impacts form the critical load case for high-performance carbon fibre reinforced polymer (CFRP) racing craft. Such events produce a peaked, non-uniform pressure distribution that travels along a hull panel as it is immersed. Current design standards ...

2024

Decarbonization potential of steel fibre-reinforced limestone calcined clay cement concrete one-way slabs

Hisham Tarek Mohamed Hafez

This study deals with a comparison of the environmental performance of one-way slabs utilizing steel fibrereinforced limestone calcined clay cement (LC3) concrete with the control case of Ordinary Portland cement concrete. The experimental program constitu ...

Elsevier Sci Ltd2024

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Diego Hernández Fraile

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

Additive Manufacturing of Bioinspired Mineral-Based Composites

Ran Zhao

Biominerals are used by natural organisms for example as structural supports and optical sensors. They are produced from a limited number of elements and under ambient conditions. Nevertheless, they often possess excellent mechanical properties and sometim ...

EPFL2024

Highly anisotropic carbon fiber electrodes for DEAs and their dynamic non-monotonic conductive properties

Yves Perriard, Stefania Maria Aliki Konstantinidi, Markus Koenigsdorff

A common method for creating compliant electrodes for dielectric elastomer actuators (DEAs) and soft sensors is to incorporate electrically conductive carbon particles into a polymer matrix. However, using unidirectional aligned carbon fibers instead not o ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Enabling simultaneous reprocessability and fire protection via incorporation of phosphine oxide monomer in epoxy vitrimer

Véronique Michaud, Valentin Rougier

The conception of epoxy thermosets with both reprocessability and flame retardancy delineates a new horizon in polymer science, offering a material solution that is not only superior in fire safety but is also environment friendly. Herein, a flame-retardan ...

Journal Mater Sci Technol2024

Experimental characterization and stochastic models for time-dependent rupture of thin-ply composite laminates

Thin-laminate composites with thicknesses below 200 mu m hold significant promise for future, larger, and lighter deployable structures. This paper presents a study of the time-dependent failure behavior of thin carbon-fiber laminates under bending, focusi ...

2024

The role of twist and crimp on the vibration behaviour of flax fibre composites

Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions

On the influence of flow-front orientation on stringer stiffened composite panels in water impacts

Decarbonization potential of steel fibre-reinforced limestone calcined clay cement concrete one-way slabs

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Additive Manufacturing of Bioinspired Mineral-Based Composites

Highly anisotropic carbon fiber electrodes for DEAs and their dynamic non-monotonic conductive properties

Enabling simultaneous reprocessability and fire protection via incorporation of phosphine oxide monomer in epoxy vitrimer

Experimental characterization and stochastic models for time-dependent rupture of thin-ply composite laminates

Graph Chatbot

Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions

On the influence of flow-front orientation on stringer stiffened composite panels in water impacts

Decarbonization potential of steel fibre-reinforced limestone calcined clay cement concrete one-way slabs

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Additive Manufacturing of Bioinspired Mineral-Based Composites

Highly anisotropic carbon fiber electrodes for DEAs and their dynamic non-monotonic conductive properties

Enabling simultaneous reprocessability and fire protection via incorporation of phosphine oxide monomer in epoxy vitrimer

Investigation of mycelium film as the adhesive for poplar veneer bonding: insight into interfacial bonding mechanisms

Experimental characterization and stochastic models for time-dependent rupture of thin-ply composite laminates

Investigation of mycelium film as the adhesive for poplar veneer bonding: insight into interfacial bonding mechanisms