Publications related to Laboratory and in situ simulation tests of the Excavation Damaged Zone around galleries in Opalinus Clay

Thermo-hydro-mechanical behaviour of the Callovo-Oxfordian claystone under thermal changes

Underground storage of radioactive waste is consensually recognised as the safest storage solution by European and worldwide countries relying mainly or partially on nuclear energy production. Over twenty years of research led by the French national agency ...

EPFL2024

A FEM modelling workflow to simulate THM effects in the rock around nuclear waste packages

Matthias Timothee Stanislas Wojnarowicz

High-level waste, stemming from nuclear electricity generation poses significant environmental and safety concerns. Currently, high-level wastes are stored in interim facilities needing constant monitoring and waiting for a definitive solution. Deep geolog ...

EPFL2024

Elongated hydraulic fracture emerging from layers of alternating fracture toughness

Brice Tanguy Alphonse Lecampion, Carlo Peruzzo

Whether used to enhance the hydrocarbon production from low permeability rocks or to measure the minimum in-situ principal stress in rock formations, height growth of a hydraulic fracture above the formation of interest is a key metric for the design of su ...

2023

Experimental and Numerical Investigation on Water Exchange of Opalinus Clay Samples

Alessio Ferrari, Eleni Stavropoulou, Qazim Llabjani, Vincenzo Sergio Vespo

Opalinus Clay is a fine-grained sedimentary geomaterial with a mineral composition consisting mainly of silicates, carbonates and quartz. Due to its favourable barrier properties, this geomaterial has been selected as the host rock for the underground disp ...

Wei Wu, Universität für Bodenkultur2023

Hydro-Mechanical Characterization of a Shale by Unusually High-Pressure Oedometric Tests

Alessio Ferrari, Eleonora Crisci

The note presents selected results of an experimental campaign conducted with the aim to investigate the hydro-mechanical behaviour of a shale recovered at a depth of about 900 m below the ground. High-pressure oedometric tests were performed to investigat ...

Wei Wu, Universität für Bodenkultur2023

A Discussion on the Reliability of prEN1992-1-1:2021 Shear Strength Provisions for Fibre Reinforced Concrete Members Without Shear Reinforcement

Miguel Fernández Ruiz

The Eurocode 2 for the design of concrete structures (EN1992-1-1:2004) is undergoing a revision that will lead to the publication of the second generation of this code to be used across all CEN member countries. Therefore, the impact of the code will reach ...

SPRINGER INTERNATIONAL PUBLISHING AG2023

Three-dimensional hydraulic fracture propagation in homogeneous and heterogeneous media

Carlo Peruzzo

Hydraulic fractures are tensile fractures that occur in solid materials due to the natural intrusion or anthropogenic injection of a viscous fluid into a fracture channel. The deliberate creation of hydraulic fractures is part of an industrial technology h ...

EPFL2023

Physical characterization of fault rocks within the Opalinus Clay formation

Marie Estelle Solange Violay, Luis Felipe Orellana Espinoza, Christophe Nussbaum

Near-surface disposal of radioactive waste in shales is a promising option to safeguard the population and environment. However, natural faults intersecting these geological formations can potentially affect the long-term isolation of the repositories. Thi ...

Nature Research2022

Experimental investigation of hydraulic fracture growth in an anisotropic rock with pre-existing discontinuities under different propagation regimes

Brice Tanguy Alphonse Lecampion, Seyyedmaalek Momeni, Guanyi Lu

Laboratory experiments have been carried out to investigate the growth of hydraulic fracture (HF) in an anisotropic rock with pre-existing discontinuities such as bedding planes and veins. The experiments are designed in light of scaling relationships that ...

2022

A Data-Knowledge Hybrid Driven Method for Gas Turbine Gas Path Diagnosis

Dimitrios Kyritsis, Jinzhi Lu, Xiaochen Zheng, Jinwei Chen

Gas path fault diagnosis of a gas turbine is a complex task involving field data analysis and knowledge-based reasoning. In this paper, a data-knowledge hybrid driven method for gas path fault diagnosis is proposed by integrating a physical model-based gas ...

MDPI2022