Publications related to Measurement of the deposition of fine sediments in a channel bed

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Characterization of Thruster-Induced Turbulence for Fine Sediment Suspension

Giovanni De Cesare, Azin Amini, Montana Marshall, Andre Luis Stakowian

Reservoir sedimentation is a key challenge for storage sustainability because it causes volume loss, affecting hydropower production capacity, dam safety, and flood management. A preliminary EPFL study proposed and studied an innovative device (called SEDM ...

2023

Continuous monitoring of morphological changes from sediment augmentation by field measurements and flume experiments

Giovanni De Cesare, Christian Mörtl

In this study, we present results from continuous field monitoring and a flume ex-periment of a sediment augmentation measure in a residual flow reach of the Swiss midlands. A straight morphological channel with fixed bed material was constructed to repres ...

2023

Influence of the shear stress on fine sediment exchanges with the substrate using UVP measurements

Giovanni De Cesare, Romain Maxime Dubuis

The dynamic of fine sediment in rivers is closely related to the interactions between fine particles, the riverbed and the flow conditions. The accumulation of fine sediment in the riverbed reduces vertical water exchanges and can have detrimental effects ...

2023

Exploring the efficacy of reservoir fine sediment management measures through numerical simulations

Giovanni De Cesare, Azin Amini, Samuel Luke Vorlet, Montana Marshall

Reservoir sedimentation is one of the main challenges in the sustainable operation of large reservoirs because it causes volume loss, affecting hydropower production capacity, dam safety, and flood management. To ensure the sustainability of deep reservoir ...

CRC Press/Balkema2023

Iron Reduction in Profundal Sediments of Ultraoligotrophic Lake Tahoe under Oxygen-Limited Conditions

Meret Aeppli

Increased periods of bottom water anoxia in deep temperate lakes due to decreasing frequency and depth of water column mixing in a warming climate may result in the reductive dissolution of iron minerals and increased flux of nutrients from the sediment in ...

2023

Plasma-Assisted Hybrid Vapour Deposition Technology for Thin Film Fabrication

Caroline Hain

Continuous development of thin film deposition technologies is essential for the fabrication of films that meet the specific requirements of their target applications and working conditions. Therefore, it is necessary to increase the number of accessible a ...

EPFL2023

Synthesis of metal oxide-overcoated carbon materials by liquid phase ALD and their applications in catalysis

Farzaneh Talebkeikhah

Coating nano particles and other substrates for efficiency enhancement, protection and obtaining new atomic structures is a widespread research topic in catalysis and material synthesis. Thus far, different approaches of coating, ranging from simplest to s ...

EPFL2023

Influence of channel geomorphic units on bedload transport and river morphology during low‐magnitude bed‐forming floods coupled with sediment augmentation

Giovanni De Cesare, Severin Stähly, Christian Mörtl, Robin Schroff

In this study, we map different types of channel geomorphic units in a sediment-starved, residual-flow reach before and after an artificial flood. Bedload particles of a previous sediment augmentation measure are tracked with passive integrated transponder ...

2023

Dynamics of Dual-Mode Bedload Transport With Three-Dimensional Alternate Bars Migration in Subcritical Flow: Experiments and Model Analysis

Mehrdad Kiani Oshtorjani, Zhipeng Li, Yong Zhang

Bedload transport often exhibits dual-mode behavior due to interactions of spatiotemporal controlling factors with the migrating three-dimensional bedforms (characterized by the fully developed patterns in the bed, such as alternate bars, pools, and cluste ...

AMER GEOPHYSICAL UNION2023