Home

Publication

Surface modified microfibrillated cellulose‐poly(vinylidene fluoride) composites: β‐phase formation, viscoelastic and dielectric performance

About
Privacy
Disclaimer

Graph Chatbot

Related publications (30)

Delayed Hydride Cracking in Irradiated and Unirradiated Zircaloy-2 Cladding

Zirconium alloys used in the nuclear industry are exposed to extreme conditions undergoing high levels of irradiation damage and corrosion. Zircaloy-2 is used as nuclear fuel cladding in boiling water reactors and for the encapsulation of the spallation ta ...

EPFL2022

Multi-scale experimental testing on variable stiffness and damping components for semi-active structural control

Gennaro Senatore

This paper presents experimental testing of a new semi-active vibration control device comprising a shape memory polymer (SMP) core that is reinforced by an SMP-aramid composite skin. This control device works as a load-transfer component that can be integ ...

ELSEVIER SCI LTD2022

Stiff, Strong, Tough, and Highly Stretchable Hydrogels Based on Dual Stimuli-Responsive Semicrystalline Poly(urethane–urea) Copolymers

Pascal Alexander Schouwink, Nicolas Candau, Adrien Julien Demongeot, Oguzhan Oguz

There has been a considerable interest in developing stiff, strong, tough, and highly stretchable hydrogels in various fields of science and technology including biomedical and sensing applications. However, simultaneous optimization of stiffness, strength ...

2021

The ratio of shear to elastic modulus of in-plane loaded masonry (vol 53, 40, 2020)

Katrin Beyer, Bastian Valentin Wilding, Michele Godio

A correction to this paper has been published: https://doi.org/10.1617/s11527-021-01653-6 ...

SPRINGER2021

Tensile response of Ultra High Performance PE Fiber Reinforced Concretes (PE-UHPFRC) under imposed shrinkage deformations

Emmanuel Denarié, Mohamed Abdul Hafiz, Amir Hajiesmaeili

PE-UHPFRC is a new Ultra High-Performance Fiber Reinforced Concrete (UHPFRC), which is developed to reduce the environmental impact of conventional UHPFRC by replacing the steel fibers with synthetic ones and reducing the clinker content in the mix. The de ...

2021

Computational micromechanics of porous brittle solids

Johan Alexandre Philippe Gaume, Henning Löwe, Lars Kristoffer Uhlen Blatny, Stephanie Wang

Porous brittle solids evidence complex mechanical behavior, where localized failure patterns originate from mechanical processes on the microstructural level. In order to investigate the failure mechanics of porous brittle solids, we outline a general stoc ...

2021

Viscoelastic behavior of suspensions of reduced graphene oxide nanoparticles in epoxy

László Forró, Yves Leterrier, Arnaud Magrez, Maryam Majidian

The viscoelastic behavior of dilute suspensions of reduced graphene oxide (RGO) nanoparticles in a liquid SU8 epoxy dissolved in gamma butyrolactone was investigated at RGO concentrations in the range from 0.16 to 1.07 vol. %. Our results revealed that the ...

AMER INST PHYSICS2021

Silk granular hydrogels self-reinforced with regenerated silk fibroin fibers

Dominique Pioletti, Pierre-Etienne Bourban, Peyman Karami, Céline Samira Wyss, Adrien Julien Demongeot

Granular hydrogels with high stability, strength, and toughness are laborious to develop. Post-curing is often employed to bind microgels chemically and enhance mechanical properties. Here a unique strategy was investigated to maintain microgels together w ...

2021

Revisiting Cation Complexation and Hydrogen Bonding of Single-Chain Polyguluronate Alginate

Modifying the properties of bio-based materials has garnered increasing interest in recent years. In related applications, the ability of alginates to complex with metal ions has been shown to be effective in liquid-to-gel transitions, useful in the develo ...

American Chemical Society2021

Pulsatile Flow-Induced Fatigue-Resistant Photopolymerizable Hydrogels for the Treatment of Intracranial Aneurysms

Dominique Pioletti, Christophe Moser, Mahmut Selman Sakar, Andreas Schmocker, Oriane Poupart, Lucio Feo Pancaldi-Giubbini

An alternative intracranial aneurysm embolic agent is emerging in the form of hydrogels due to their ability to be injected in liquid phase and solidify in situ. Hydrogels have the ability to fill an aneurysm sac more completely compared to solid implants ...

2021

Page 3 of 3

The ratio of shear to elastic modulus of in-plane loaded masonry (vol 53, 40, 2020)

Katrin Beyer, Bastian Valentin Wilding, Michele Godio

A correction to this paper has been published: https://doi.org/10.1617/s11527-021-01653-6 ...

SPRINGER2021

Computational micromechanics of porous brittle solids

Johan Alexandre Philippe Gaume, Henning Löwe, Lars Kristoffer Uhlen Blatny, Stephanie Wang

2021

Viscoelastic behavior of suspensions of reduced graphene oxide nanoparticles in epoxy

László Forró, Yves Leterrier, Arnaud Magrez, Maryam Majidian

AMER INST PHYSICS2021

Tensile response of Ultra High Performance PE Fiber Reinforced Concretes (PE-UHPFRC) under imposed shrinkage deformations

Emmanuel Denarié, Mohamed Abdul Hafiz, Amir Hajiesmaeili

2021

Stiff, Strong, Tough, and Highly Stretchable Hydrogels Based on Dual Stimuli-Responsive Semicrystalline Poly(urethane–urea) Copolymers

Pascal Alexander Schouwink, Nicolas Candau, Adrien Julien Demongeot, Oguzhan Oguz

2021