On the Use of Transient Information for Static Real-Time Optimization

Optimal operation of chemical processes is key for meeting productivity, quality, safety and environmental objectives. Both model-based and data-driven schemes are used to compute optimal operating conditions [1]: - The model-based techniques are intuitive and widespread, but they suffer from the effect of plant-model mismatch. For instance, an inaccurate plant model leads to operating conditions that typically are not optimal for the plant and may violate constraints. Furthermore, even with an accurate model, the presence of disturbances generally leads to a drift of the optimal operating conditions, and adaptation based on measurements is needed to maintain plant optimality. - The data-driven optimization techniques rely on measurements to adjust the optimal inputs in real time. Consequently, real-time measurements are typically used to help achieve plant optimality. This field, which is labeled real-time optimization (RTO), has received growing attention in recent years. RTO schemes can be of two types: explicit schemes solve a numerical optimization problem repeatedly, while implicit schemes adjust the inputs on-line in a control inspired manner. Explicit RTO schemes solve a numerical optimization problem repeatedly. For example, the two-step approach uses (i) measurements to update the model parameters, and (ii) the updated model to perform the numerical optimization [2]. It has also been proposed to update the model differently. Instead of adjusting the model parameters, input-affine correction terms can be added to the cost and constraint functions of the optimization problem so that it shares the first-order optimality condition with the plant. The main advantage of the technique, labeled modifier adaptation (MA), lies in its proven ability to converge to the plant optimum, even in the presence of structural plant-model mismatch [3]. Furthermore, MA is capable of detecting the correct set of active plant constraints without additional assumptions. As a static optimization method applicable to continuous plants, MA requires waiting for steady state before taking measurements, updating the correction terms and repeating the numerical optimization. Hence, several iterations are generally required to achieve convergence. The main difficulty lies in the estimation of the steady-state plant gradient at each iteration. In contrast, implicit RTO schemes, such as extremum-seeking control [4], self optimizing control [5] and NCO tracking [6], propose to adjust the inputs on-line in a control-inspired manner. In the absence of constraints, or when assumptions can be made regarding the set of plant constraints that are active at the optimum, implicit RTO methods reduce to gradient control, as the degrees of freedom are adjusted in real time to drive the plant cost gradient to zero. Here again, the difficulty lies in the estimation of the steady-state plant gradient, which, in addition, must be performed during transient operation.