Publication

Controlling Light in Scattering Materials for Volumetric Additive Manufacturing

Related publications (32)

Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review

There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a poss ...

MDPI2023

Controlling the Microstructure and Composition of 3D Printed Soft Load-Bearing Hydrogels

Matteo Hirsch

Hydrogels are among the first materials expressly designed for their use in biomedicine. However, state-of-the-art applications of hydrogels are severely limited because they are typically either too soft or too brittle such that they cannot bear significa ...

EPFL2023

Scattering from Time-Modulated Transmission-Line Loads: Theory and Experiments in Acoustics

Romain Christophe Rémy Fleury, Matthieu Francis Malléjac

Scattering wave systems that are periodically modulated in time offer many new degrees of freedom to control waves in both the spatial and frequency domains. Such systems, albeit linear, do not conserve frequency and require the adaptation of the usual the ...

American Physical Society (APS)2023

Nonperturbative aspects of scattering amplitudes

Miguel Alexandre Ribeiro Correia

In this thesis we study how physical principles imposed on the S-matrix, such as Lorentz invariance, unitarity, crossing symmetry and analyticity constrain quantum field theories at the nonperturbative level. We start with a pedagogical introduction to the ...

EPFL2023

Gamma-Blind Fast Neutron Detection for Spent Nuclear Fuel Characterization

Alexander Wolfertz

In this thesis, the development and testing of a system for measuring the axial distribution of fast neutron emission of spent nuclear fuel rods is presented. Emphasis is placed on the novel fast neutron detector used which can reliably work in extremely h ...

EPFL2023

Broadband spectroscopy and inelastic light scattering on the canted antiferromagnet hematite for antiferromagnetic magnonics

Mohammad Hamdi

Collective spin excitations propagating in magnetically ordered materials are called spin waves (SWs) or magnons. They are promising for low-power and beyond-CMOS information processing, which do not suffer from the ohmic losses. SWs in ferromagnets (antif ...

EPFL2023

A review of materials used in tomographic volumetric additive manufacturing

Christophe Moser, Jorge Andres Madrid Wolff, Riccardo Rizzo

Volumetric additive manufacturing is a novel fabrication method allowing rapid, freeform, layer-less 3D printing. Analogous to computer tomography (CT), the method projects dynamic light patterns into a rotating vat of photosensitive resin. These light pat ...

SPRINGER HEIDELBERG2023

Characterization of transversely confined electron beam-generated plasma using two-dimensional particle-in-cell simulations

Haomin Sun, Guang-Yu Sun

Electron beam-generated plasmas (EBPs) have been used to modify the surface properties. In certain applications, EBPs are transversely confined and their properties are of value to the treatment. In this paper, the characteristics of an electron beam-gener ...

American Institute of Physics (AIP)2023

Additive and digital manufacturing of transient sensors and bioelectronics

Nicolas Francis Fumeaux

Transient electronics have emerged as a promising class of devices, capable of breaking down without harmful side effects to their environment. They have tremendous potential as bioresorbable electronics for temporary applications in the human body, and as ...

EPFL2023

The physics of 3D printing with light

Christophe Moser

The goal of 3D printing is to realize complex 3D structures by locally adding material in small volume elements called voxels - in contrast to successively subtracting material by etching, milling or machining. This field started with optics-based proposal ...

Nature Portfolio2023