Quench experiments on sub-size HTS Cable-In-Conduit Conductors for fusion applications: Data analysis and model validation

Related publications (31)

About
Privacy
Disclaimer

Graph Chatbot

Optimization of X-mode electron cyclotron current drive in high-electron-temperature plasma in the EAST tokamak

A discharge with electron temperature up to 14 keV has been achieved in EAST. Analysis of the electron cyclotron current drive (ECCD) efficiency at high electron temperature under EAST parameters is presented using C3PO/LUKE code. Simulation results show t ...

2023

AC loss and electrical resistance of the RW3 diffusion-bonded joint

Vincenzo D'Auria

For the European DEMO fusion reactor, several options of the Toroidal Field (TF) coil design were proposed. The winding of the TF coil option 1 is based on React&Wind (RW), Nb3Sn, graded conductors in order to optimize the amount of superconductor accordin ...

2023

Equilibrium pressure limits in stellarators

Antoine Baillod

This thesis delves into the potential of magnetic fusion energy, and in particular focuses on the stellarator concept. Stellarators use external coils to produce 3-dimensional (3D) magnetic fields that confine a thermonuclear plasma in a topologically toro ...

EPFL2023

Manufacture and performance test result of a 95 kA-class Nb-Ti cable-in-conduit conductor for the low field winding-package of CFETR-TF coil

Pierluigi Bruzzone, Kamil Sedlák

The engineering design of the CFETR TF prototype coil and conductors has been completed. The wind-package (WP) of the coil is graded into three regions based on the magnetic field distribution for saving cost. High-Jc Nb3Sn strand, ITER-like Nb3Sn strand a ...

Elsevier2023

3D Characterisation of Turbulent Plasma Filaments Using Gas Puff Imaging in the Tokamak à Configuration Variable

Nicola Offeddu

A key challenge for the development of fusion reactors based on magnetic confinement, such as tokamaks and stellarators, is the control of the turbulent processes. The most prominent feature of turbulence in the Scrape-Off Layer (SOL), the volume between t ...

EPFL2023

The JET hybrid scenario in Deuterium, Tritium and Deuterium-Tritium

Matteo Fontana, Haomin Sun, Javier García Hernández, Mikhail Maslov

The JET hybrid scenario has been developed from low plasma current carbon wall discharges to the record-breaking Deuterium-Tritium plasmas obtained in 2021 with the ITER-like Be/W wall. The development started in pure Deuterium with refinement of the plasm ...

IOP Publishing Ltd2023

Modelling of nonneutral plasmas trapped by electric and magnetic fields relevant to gyrotron electron guns

Guillaume Michel Le Bars

Gyrotrons are a class of high-power vacuum-electronics microwave sources, which are envisioned to play an important role in the domain of magnetically confined fusion plasmas. Indeed, only gyrotrons are capable of producing continuous electromagnetic waves ...

EPFL2023

Essay: Overcoming the Obstacles to a Magnetic Fusion Power Plant

Ambrogio Fasoli

Fusion occurs when light nuclei combine to form heavier nuclei. The energy released in this process powers the stars and can provide humankind with a safe, sustainable, and clean source of baseload electricity, a valuable tool in the fight against climate ...

AMER PHYSICAL SOC2023

Equilibrium β-limits dependence on bootstrap current in classical stellarators

Jonathan Graves, Joaquim Loizu Cisquella, Antoine Baillod

While it is important to design stellarators with high magnetohydrodynamic stability β-limit, it is also crucial to ensure that good magnetic surfaces exist in a large range of β values. As β increases, pressure-driven currents perturb the vacuum magnetic ...

Cambridge University Press2023

Predictive modeling of Alfvén eigenmode stability in inductive scenarios in JT-60SA

Javier García Hernández, Matteo Vallar, Antonio José Pereira de Figueiredo

The JT-60SA device offers unique conditions before ITER for the study of the interaction of energetic particles with plasma waves. With similar dimensions to JET, e.g., a major radius but with a slightly more elongated plasma volume, JT-60SA is used as a h ...

Frontiers Media Sa2023

Page 2 of 4

Manufacture and performance test result of a 95 kA-class Nb-Ti cable-in-conduit conductor for the low field winding-package of CFETR-TF coil

Pierluigi Bruzzone, Kamil Sedlák

Elsevier2023