Henning Paul-Julius StahlbergPositions:
Since 2020 Prof. Physics, IPHYS, SB, EPFL, Switzerland 2009 – 2021 Prof. Structural Biology, Biozentrum, University Basel, Switzerland
2009 – 2010 Adj. Assoc. Prof. Molecular & Cellular Biology, UC Davis, CA, USA
2007 – 2009 Assoc. Prof. Molecular & Cellular Biology, UC Davis, CA, USA
2003 – 2007 Assist. Prof. Molecular & Cellular Biology, UC Davis, CA, USA
Education: 2002 Habilitation, Biozentrum, University Basel, Switzerland 1997 – 2003 Postdoctoral Fellow, Biozentrum, University Basel, Switzerland 1992 – 1997 PhD Student, EPFL, Lausanne, Switzerland 1990 – 1991 Diploma Thesis in Solid State Physics, TU Berlin, Germany 1987 – 1993 Study of Physics, TU Berlin, Germany Selected Awards & Honors: 2009 W.M.Keck Award 2004 CAREER award, NSF, USA 2002 Habilitation, University Basel, Switzerland Selected Memberships: 2008 – 2013 Chancellor’s Fellow Award, UC Davis, CA, USA 2004 – 2009 Faculty of 1000 Since 1992 Swiss Society for Optics and Microscopy (SSOM)
Mark PaulyMark Pauly is a full professor at the School of Computer and Communication Sciences at EPFL. Prior to joining EPFL, he was assistant professor at the CS department of ETH Zurich since April 2005. From August 2003 to March 2005 he was a postdoctoral scholar at Stanford University, where he also held a position as visiting assistant professor during the summer of 2005. He received his Ph.D. degree (with distinction) in 2003 from ETH Zurich and his M.S. degree (with highest honors) in 1999 from TU Kaiserslautern. His research interests include computer graphics and animation, shape modeling and analysis, geometry processing, architectural geometry, and digital fabrication. He received the ETH medal for outstanding dissertation, was awarded the Eurographics Young Researcher Award in 2006 and the Eurographics Outstanding Technical Contributions Award in 2016.
Anastasios VassilopoulosPERSONAL INFORMATION Name : Anastasios P. Vassilopoulos email : anastasios.vassilopoulos@epfl.ch Tel: 41 21 6936393 Fax: 41 21 6936240 SUMMARY OF QUALIFICATIONS 1995: Dipl. Mechanical Engineer, University of Patras, Greece 2001: Dr Mechanical Engineer, Doctoral thesis in fatigue of composite materials from the Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece CURRENT POSITION Senior Scientist (MER), Composite Construction Laboaratory (CCLab), EPFL PREVIOUS POSITIONS 2006-2012 Research and Teaching Associate, Composite Construction Laboaratory (CCLab), EPFL 2002-2006 Assisstant Professor, Technological Educational Institute (TEI) of Patras, Greece 2001-2003 Post-doctoral Research associate, (Part-time) Dept. Mechanical Engineering and Aeronautics of the University of Patras, Greece. EDUCATION 1990 - 1995 Graduate student, Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece October 1994-January 1995 Dept. Mechanical Engineering, University of Bristol, U.K. (In the frame of Erasmus project for the final year thesis, under the supervision of Prof. R. D. Adams) 1995 - 2000 Research assistant, Dept. Mechanical Engineering and Aeronautics, University of Patras. LANGUAGES English, Greek, French COMMUNITY ACTIVITIES (Member of) Council of the European Society of Composite Materials (ESCM) Council of the European Society of Experimental Mechanics (EuraSEM) The European Structural Integrity Society (ESIS) The European Energy Research Alliance (EERA, JP WIND) The Technical Chamber of Greece (TCG) The Hellenic Association of Mechanical & Electrical Engineers SCIENTIFIC-RESEARCH INTERESTS Experimental methods for the study of the behavior of composite materials under static and fatigue loading Development of analytical methods for the study of the behavior of FRP composite materials under variable amplitude complex stress states Development of fatigue life prediction methodologies for composite materials and structures Design of constructions with composite materials Alfredo PasquarelloAlfredo Pasquarello studied physics at the
Scuola Normale Superiore
of Pisa and at the University of Pisa, obtaining their respective degrees in 1986. He obtained a doctoral degree at the EPFL in 1991 with a thesis on
Multiphoton Transitions in Solids
. Then, he moved to Bell Laboratories at Murray Hill (New Jersey), where he carried out postdoctoral research on the magnetic properties of carbon fullerenes. In 1993, he joined the Institute for Numerical Research in the Physics of Materials (IRRMA), where his activity involved first-principles simulation methods. In 1998, he was awarded the EPFL Latsis Prize for his research work on disordered silica materials. Succeeding in grant programs of the Swiss National Science Foundation, he then set up his own research group at IRRMA. In July 2003, he is appointed Professor in Theoretical Condensed Matter Physics at EPFL. Currently, he leads the Chair of Atomic Scale Simulation.
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Ursula RöthlisbergerU. Röthlisberger was born in Solothurn (Switzerland). In 1988 she made her diploma in Physical Chemistry in the group of Prof. Ernst Schumacher at the University of Berne (Switzerland). Her Ph.D. thesis was done in collaboration with Dr. Wanda Andreoni at the IBM Zurich Research Laboratory in Rüschlikon. After finishing her Ph.D in 1991 she spent some time as a postdoctoral research assistant at the IBM Research Lab. From 1992-1995 she was a postdoctoral research assistant in the group of Prof. Michael L. Klein at the University of Pennsylvania in Philadelphia (USA). In 1994 she was awarded an advanced researcher fellowship (Profil 2) from the Swiss National Science Foundation. Before starting her Profile 2-fellowship she spent another year as postdoctoral research assistant in the group of Prof. Michele Parrinello at the Max-Planck-Institute for Solid State Physics in Stuttgart, Germany. In 1996 she moved as Profile 2-fellow to the ETH in Zurich, hosted by the group of Prof. Wilfred F. van Gunsteren. In 1997 she became Assistant Professor of Computer-Aided Inorganic Chemistry at the ETH Zurich.
