CIME - Comite de Direction

Center

Related publications (93)

, ,

Copper-based tandem schemes have emerged as promising strategies to promote the formation of multi-carbon products in the electrocatalytic CO2 reduction reaction. In such approaches, the CO-generating component of the tandem catalyst increases the local concentration of CO and thereby enhances the intrinsic carbon-carbon (C-C) coupling on copper. However, the optimal characteristics of the CO-generating catalyst for maximizing the C-2 production are currently unknown. In this work, we developed tunable tandem catalysts comprising iron porphyrin (Fe-Por), as the CO-generating component, and Cu nanocubes (Cucub) to understand how the turnover frequency for CO (TOFCO) of the molecular catalysts impacts the C-C coupling on the Cu surface. First, we tuned the TOFCO of the Fe-Por by varying the number of orbitals involved in the pi-system. Then, we coupled these molecular catalysts with the Cu-cub and assessed the current densities and faradaic efficiencies. We discovered that all of the designed Fe-Por boost ethylene production. The most efficient Cu-cub/Fe-Por tandem catalyst was the one including the Fe-Por with the highest TOFCO and exhibited a nearly 22-fold increase in the ethylene selectivity and 100 mV positive shift of the onset potential with respect to the pristine Cu-cub. These results reveal that coupling the TOFCO tunability of molecular catalysts with copper nanocatalysts opens up new possibilities towards the development of Cu-based catalysts with enhanced selectivity for multi-carbon product generation at low overpotential.

ROYAL SOC CHEMISTRY2022

2022 roadmap on low temperature electrochemical CO2 reduction

Etienne Boutin, Raffaella Buonsanti, Sophia Haussener, Xuan Liu, Ming Ma, Ludmilla Steier, Xiaoyan Wang

Electrochemical CO2 reduction (CO2R) is an attractive option for storing renewable electricity and for the sustainable production of valuable chemicals and fuels. In this roadmap, we review recent progress in fundamental understanding, catalyst development, and in engineering and scale-up. We discuss the outstanding challenges towards commercialization of electrochemical CO2R technology: energy efficiencies, selectivities, low current densities, and stability. We highlight the opportunities in establishing rigorous standards for benchmarking performance, advances in in operando characterization, the discovery of new materials towards high value products, the investigation of phenomena across multiple-length scales and the application of data science towards doing so. We hope that this collective perspective sparks new research activities that ultimately bring us a step closer towards establishing a low- or zero-emission carbon cycle.

IOP Publishing Ltd2022

Impact of Interface Traps in Floating-Gate Memory Based on Monolayer MoS2

Andras Kis, Guilherme Migliato Marega

Two-dimensional materials (2DMs) have found potential applications in many areas of electronics, such as sensing, memory systems, optoelectronics, and power. Despite an intense experimental work, the literature is lacking of accurate modeling of nonvolatile memories (NVMs) based on 2DMs. In this work, using technology CAD simulations and model calibration with experiments, we show that the experimental program/erase characteristics of floating-gate (FG) memory devices based on monolayer molybdenum disulphide can be explained by considering bandgap trap states at the dielectric-semiconductor interface. The simulation model includes a classical approach based on drift-diffusion longitudinal channel transport and on nonlocal Wentzel-Kramers-Brillouin (WKB) tunneling for transversal transport (responsible of FG charging/discharging) and for tunneling at contacts. From hysteresis and pulse programming simulations on scaled devices, we find that the long-channel programming window is still maintained at similar to 100 nm and that process improvements aimed at reducing the concentration of interface traps in the semiconducting bandgap could significantly optimize memory operation.

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

, , , ,

Metal nanoclusters are a unique class of synthetic material, as their crystal structures can be resolved using X-ray diffraction, and their chemical formula can be precisely determinated from mass spectroscopy. However, a complete structure characterization by these two techniques is often a challenging task. Here, we utilize small-angle neutron scattering (SANS) to directly quantify the key structure parameters of a series of silver and gold nanoclusters in solution. The results not only correlate well to their crystallographic structures, but also allow the quantification of the counterions layer surrounding charged nanoclusters in solution. Furthermore, when combining with X-ray scattering, it is possible to estimate the molecular weight of both the metal core and the ligand shell of nanoclusters. This work offers an alternative characterization tool for nanoclusters without the requirement of crystallization or gas phase ionization.

WILEY-V C H VERLAG GMBH2022

High-Throughput Nanopore Fabrication and Classification Using Xe-Ion Irradiation and Automated Pore-Edge Analysis

Andras Kis, Martina Lihter, Michal Daniel Macha, Sanjin Marion, Aleksandra Radenovic, Mukeshchand Thakur, Mukesh Kumar Tripathi

Large-area nanopore drilling is a major bottleneck in state-of-the-art nanoporous 2D membrane fabrication protocols. In addition, high-quality structural and statistical descriptions of as-fabricated porous membranes are key to predicting the corresponding membrane-wide permeation properties. In this work, we investigate Xe-ion focused ion beam as a tool for scalable, large-area nanopore fabrication on atomically thin, free-standing molybdenum disulfide. The presented irradiation protocol enables designing ultrathin membranes with tunable porosity and pore dimensions, along with spatial uniformity across large-area substrates. Fabricated nanoporous membranes are then characterized using scanning transmission electron microscopy imaging, and the observed nanopore geometries are analyzed through a pore-edge detection and analysis script. We further demonstrate that the obtained structural and statistical data can be readily passed on to computational and analytical tools to predict the permeation properties at both individual pore and membrane-wide scales. As an example, membranes featuring angstrom-scale pores are investigated in terms of their emerging water and ion flow properties through extensive all-atom molecular dynamics simulations. We believe that the combination of experimental and analytical approaches presented here will yield accurate physics-based property estimates and thus potentially enable a true function-by-design approach to fabrication for applications such as osmotic power generation and desalination/filtration.

AMER CHEMICAL SOC2022

Wafer-scale MoS2 with water-vapor assisted showerhead MOCVD

Hyungoo Ji, Andras Kis, Michal Daniel Macha, Aleksandra Radenovic, Mukeshchand Thakur, Mukesh Kumar Tripathi, Yanfei Zhao

Among numerous thin film synthesis methods, metalorganic chemical vapor deposition performed in a showerhead reactor is the most promising one for broad use in scalable and commercially adaptable two-dimensional material synthesis processes. Adapting the most efficient monolayer growth methodologies from tube-furnace systems to vertical-showerhead geometries allows us to overcome the intrinsic process limitations and improve the overall monolayer yield quality. Here, we demonstrate large-area, monolayer molybdenum disulphide growth by combining gas-phase precursor supply with unique tube-furnace approaches of utilizing sodium molybdate pre-seeding solution spincoated on a substrate along with water vapor added during the growth step. The engineered process yields a high-quality, 4-inch scale monolayer film on sapphire wafers. The monolayer growth coverage, average crystal size and defect density were evaluated using Raman and photoluminescence spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and scanning transmission electron microscopy imaging. Our findings provide a direct step forward toward developing a reproducible and large-scale MoS2 synthesis with commercial showerhead reactors.

ROYAL SOC CHEMISTRY2022

, , , , , , ,

Selective area epitaxy (SAE) provides the path for scalable fabrication of semiconductor nanostructures in a device-compatible configuration. In the current paradigm, SAE is understood as localized epitaxy, and is modelled by combining planar and self-assembled nanowire growth mechanisms. Here we use GaAs SAE as a model system to provide a different perspective. First, we provide evidence of the significant impact of the annealing stage in the calculation of the growth rates. Then, by elucidating the effect of geometrical constraints on the growth of the semiconductor crystal, we demonstrate the role of adatom desorption and resorption beyond the direct-impingement and diffusion-limited regime. Our theoretical model explains the effect of these constraints on the growth, and in particular why the SAE growth rate is highly sensitive to the pattern geometry. Finally, the disagreement of the model at the largest pitch points to non-negligible multiple adatom recycling between patterned features. Overall, our findings point out the importance of considering adatom diffusion, adsorption and desorption dynamics in designing the SAE pattern to create pre-determined nanoscale structures across a wafer. These results are fundamental for the SAE process to become viable in the semiconductor industry.

IOP Publishing Ltd2022

Ion-bridges and lipids drive aggregation of same-charge nanoparticles on lipid membranes

Zekiye Pelin Güven, Giulia Rossi, Francesco Stellacci

The control of the aggregation of biomedical nanoparticles (NP) in physiological conditions is crucial as clustering may change completely the way they interact with the biological environment. Here we show that Au nanoparticles, functionalized by an anionic, amphiphilic shell, spontaneously aggregate in fluid zwitterionic lipid bilayers. We use molecular dynamics and enhanced sampling techniques to disentangle the short-range and long-range driving forces of aggregation. At short inter-particle distances, ion-mediated, charge-charge interactions (ion bridging) stabilize the formation of large NP aggregates, as confirmed by cryo-electron microscopy. Lipid depletion and membrane curvature are the main membrane deformations driving long-range NP-NP attraction. Ion bridging, lipid depletion, and membrane curvature stem from the configurational flexibility of the nanoparticle shell. Our simulations show, more in general, that the aggregation of same-charge membrane inclusions can be expected as a result of intrinsically nanoscale effects taking place at the NP-NP and NP-bilayer soft interfaces.

ROYAL SOC CHEMISTRY2022

Allosteric control of type I-A CRISPR-Cas3 complexes and establishment as effective nucleic acid detection and human genome editing tools

Dongchun Ni, Henning Paul-Julius Stahlberg

Type I CRISPR-Cas systems typically rely on a two-step process to degrade DNA. First, an RNA-guided complex named Cascade identifies the complementary DNA target. The helicase-nuclease fusion enzyme Cas3 is then recruited in trans for processive DNA degradation. Contrary to this model, here, we show that type I-A Cascade and Cas3 function as an integral effector complex. We provide four cryoelectron microscopy (cryo-EM) snapshots of the Pyrococcus furiosus (Pfu) type I-A effector complex in different stages of DNA recognition and degradation. The HD nuclease of Cas3 is autoinhibited inside the effector complex. It is only allosterically activated upon full R-loop formation, when the entire targeted region has been validated by the RNA guide. The mechanistic insights inspired us to convert Pfu Cascade-Cas3 into a high-sensitivity, low-background, and temperature-activated nucleic acid detection tool. Moreover, Pfu CRISPR-Cas3 shows robust bi-directional deletion-editing activity in human cells, which could find usage in allele-specific inactivation of disease-causing mutations.

CELL PRESS2022

Stress induced delamination of suspended MoS2 in aqueous environments

Michal Daniel Macha, Sanjin Marion, Aleksandra Radenovic, Mukeshchand Thakur

Applying hydrostatic pressure with suspended 2D material thin membranes allows probing the effects of lateral strain on the ion and fluid transport through nanopores. We demonstrate how both permanent and temporary delamination of 2D materials can be induced by pressure and potential differences between the membrane, causing a strong mechanosensitive modulation of ion transport. Our methodology is based on in situ measurements of ionic current and streaming modulation as the supporting membrane is indented or bulged with pressure. We demonstrate how indirect measurements of fluid transport through delaminated MoS2 membranes is achieved through monitoring streaming current and potential. This is combined with TEM images of 2D material membranes before and after aqueous measurements, showing temporary delamination during mechanical or electrical stress. The obtained results allow a better understanding of measurements with supported 2D materials, i.e. avoiding misinterpreting measured data, and could be used to probe how the electrical field and fluid flow at the nanoscale influence the adhesion of supported 2D materials.

ROYAL SOC CHEMISTRY2022