Sandro CarraraSandro Carrara is an IEEE Fellow for his outstanding record of accomplishments in the field of design of nanoscale biological CMOS sensors. He is also the recipient of the IEEE Sensors Council Technical Achievement Award in 2016 for his leadership in the emerging area of co-design in Bio/Nano/CMOS interfaces. He is a Professor of the EPFL in Lausanne (Switzerland), and head of the "Bio/CMOS Interfaces" (BCI) research group. He is former professor of optical and electrical biosensors at the Department of Electrical Engineering and Biophysics (DIBE) of the University of Genoa (Italy) and former professor of nanobiotechnology at the University of Bologna (Italy). He holds a PhD in Biochemistry & Biophysics from University of Padua (Italy), a Master degree in Physics from University of Genoa (Italy), and a diploma in Electronics from National Institute of Technology in Albenga (Italy). His scientific interests are on electrical phenomena of nano-bio-structured films, and include CMOS design of biochips based on proteins and DNA. Along his carrier, he published 7 books, one as author with Springer on Bio/CMOS interfaces and, more recently, a Handbook of Bioelectronics with Cambridge University Press. He has more than 250 scientific publications and is author of 13 patents. He is now Editor-in-Chief of the IEEE Sensors Journal, the largest journal among 2019 IEEE publications; he is also founder and Editor-in-Chief of the journal BioNanoScience by Springer, and Associate Editor of IEEE Transactions on Biomedical Circuits and Systems. He is a member of the IEEE Sensors Council and his Executive Committee. He was a member of the Board of Governors (BoG) of the IEEE Circuits And Systems Society (CASS). He has been appointed as IEEE Sensors Council Distinguished Lecturer for the years 2017-2019, and CASS Distinguished Lecturer for the years 2013-2014. His work received several international recognitions: several Top-25 Hottest-Articles (2004, 2005, 2008, 2009, and two times in 2012) published in highly ranked international journals such as Biosensors and Bioelectronics, Sensors and Actuators B, IEEE Sensors journal, and Thin Solid Films; a NATO Advanced Research Award in 1996 for the original contribution to the physics of single-electron conductivity in nano-particles; six Best Paper Awards at the IEEE Sensors Conference 2019 (Montreal) in 2019, Conferences IEEE NGCAS in 2017 (Genoa), MOBIHEALTH in 2016 (Milan), IEEE PRIME in 2015 (Glasgow), in 2010 (Berlin), and in 2009 (Cork); three Best Poster Awards at the EMBEC Conference in 2017 (Tampere, Finland), Nanotera workshop in 2011 (Bern), and NanoEurope Symposium in 2009 (Rapperswil). He also received the Best Referees Award from the journal Biosensor and Bioelectronics in 2006. From 1997 to 2000, he was a member of an international committee at the ELETTRA Synchrotron in Trieste. From 2000 to 2003, he was scientific leader of a National Research Program (PNR) in the filed of Nanobiotechnology. He was an internationally esteemed expert of the evaluation panel of the Academy of Finland in a research program for the years 2010-2013. He has been the General Chairman of the Conference IEEE BioCAS 2014, the premier worldwide international conference in the area of circuits and systems for biomedical applications
Gian Luca BarbruniGian Luca Barbruni achieved his BSc and his MSc in Biomedical Engineering with specialisation in Biomedical Instrumentation at the Politecnico di Torino in 2017 and 2019, respectively.During his master thesis, supervised by Prof. Danilo Demarchi from Politecnico di Torino and titled “Body Dust: Feasibility study on signal transmission for sub-100μm-size active wireless biosensors”, he spent a semester of research at Integrated Circuit Laboratory (ICLAB) of Neuchâtel under the supervision of Prof. Sandro Carrara from École Polytechnique Fédérale de Lausanne (EPFL), Switzerland. He discusses about the feasibility on creating an UltraSound (US) communication circuit to wirelessly transmit outside the body diagnostic information from multiplexed biosensors chip built on the top layer of a drinkable CMOS “Body Dust” cube. The results of the feasibility study have been published showing promising results with sub-10 µW of power consumption and a total chip area of 43 x 44 µm2.He was a Research Assistant at the Department of Electronic Engineering (DET) of Politecnico di Torino.Actually he is conducting his PhD focusing on design and fabrication of analog and digital circuits for ultra-miniaturized CMOS for vision prosthesis, directed by Prof. Diego Ghezzi at Medtronic Chair in Neuroengineering in Geneva and co-directed by Prof. Sandro Carrara at ICLAB in Neuchâtel.
Johanna ZikulnigJohanna Zikulnig was born in 1990 in Graz and lives in Carinthia, which is located in the South of Austria. In 2017, she obtained a master’s degree in Biomedical Engineering from the Graz University of Technology. After working as a Junior Researcher in the Smart Systems Group at Carinthian Tech Research, she joined the Sensor Applications Group at Silicon Austria Labs (SAL), where she is currently employed as a Scientist.
Her scientific interests are on the development of sustainable sensors focusing on printing and hybrid technologies.
As part of her PhD project at EPFL, a sustainable self sufficient sensor platform for gas sensing applications will be developed. The goal is to use sustainable materials and additive manufacturing without requiring a battery or other potentially environmentally harmful components for energy storage and supply. This self-sufficient gas sensing platform can be used for e.g. low-cost and wireless breath analysis. The PhD project is co-supervised by Prof. Sandro Carrara (EPFL) and Dr. Jürgen Kosel (Head of SAL research unit “Sensor Applications”).
Junrui ChenJunrui Chen was born in 1995 in Jinhua, China.
He achieved his BSc. in mechanism and its automation from Beihang University(BUAA), Beijing in 2017. Meanwhile, he also gets a second degree in Business administration and management. He graduated with MSc. at Karlsruhe Institute of Technology (KIT), Germany in 2021, majored in medical technology (IBT, Instituts für Biomedizinische Technik) and Biomems technology (IMT, Institute of Microstructure Technology).
In March 2022 he joined Integrated Circuits Laboratory (ICLAB) at EPFL and is currently pursuing his Ph.D. in Microsystems and Microelectronics under the supervision of Prof. Sandro Carrara. His current research field is based on silicon memristive nanowire, which is a cross-discipline project supported by expertise in Microstructure technology, promoted by a solid background in Machinery and Electronics, and supplemented by programming skills.
