Christian Ludwig2005 - today: Adjunct Professor at EPFL in the field of Solid Waste Treatment and head of the Chemical Processes and Materials research group (CPM) at Paul Scherrer Institute (PSI). Joint EPFL-PSI Professorship on Solid Waste Treatment. 2000 - today: Head, Group of Chemical Processes and Materials (CPM) at Paul Scherrer Institut (PSI). In 2009 the LEM unit was closed and the CPM group is now affiliated to the Bioenergy and Catalysis Laboratory (LBK) of the Energy and Environment Research Division (ENE). Since June 2002 permanent position ("tenure"). 1997 - 1999: Senior Scientist. Paul Scherrer Institut (PSI), General Energy Research Department, Element Cycles Section. 1995 - 1997: Research Fellow. Swiss Federal Institute for Environmental Science and Technology (EAWAG), Department of Resource and Waste Management. 1993 - 1995: Post-doc Fellow. University of California Davis, Department of Land, Air, and Water Resources (LAWR). 1990 - 1993: PhD Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry. 1989 - 1990: Master Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry.
Marco Cantoni1982-1988, Diploma course in Experimental Physics (certificate, 28.10.88)ETHZ Faculty IX MATHEMATICS and PHYSICS, Diploma Thesis: "Abweichungen von der ikosaedrischen Symmetrie in Al-Cu-Li Quasikristallen", Advisor: Prof. H.-U. Nissen 1989-1993, Ph.D. in Experimental Physics (certificate, 23.8.94) ETHZ Physics Department, Laboratory of Solid State Physics, Ph. D. Thesis No. 10421, Title: "Elektronenmikroskopische Untersuchung der Realkristallstruktur epitaktischer Schichten von Supraleitern des Typs SEBa2Cu3O7-x auf (100)-SrTiO3" Advisors: Prof. H.R. Ott, Prof. H. U. Nissen. 1994-1996,ETH Zürich,Material Science Department, Non-Metallic Materials, Prof. L. Gauckler: Microstructure characterisation of high-tech ceramic materials by means of SEM, TEM and atomic force microscopy: superconductor thick films (Bi-2212 on Ag) and solid oxide fuel cells (ZrO2, CeO2). 1996-1998, National Institute for Research in Inorganic Materials NIRIM, Japan Group for Special Research, Prof. S. Horiuchi: TEM of Bi-2223/Ag Tapes, Application of Imaging Plates (IP) in High Voltage TEM, Cryo-Lorentz-TEM of Superconducting Materials (Observation of Flux-Lines) 1998-2000, Ecole polytechnique fédéral de Lausanne, EPFL-CIME Centre interdépartemental de microscopie électronique CIME, Prof. P.A. Buffat: Projet 125, PPO II (programme prioritaire optique): Characterization of materials and devices for optic and optoelectronic applications by electron microscopy. 2001-2003, Ecole polytechnique fédéral de Lausanne, EPFL STI IMX LCCeramics Laboratory, Prof. Nava Setter Characterisation of ferroelectric materials, transmission electron microscopy of relaxor ferroelectric materials 2004, University of Geneva, Physics Department, Condensed matter Physics Group of Prof. R. Flükiger, TEM of Multifilament Nb3Sn superconducting wires, in collaboration with EPFL-CIME Since 1.11.04, EPFL-SB-CIME
Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Karl AbererCo-Founder of LinkAlong Sarl, 2017.Vice-president EPFL for Information Systems, 2012 –2016.Director of the Swiss National Centre for Mobile Information and Communication Systems NCCR MICS (mics.ch), 2005 -2012.Member of the Swiss Research and Technology Council SWTR, consulting the Swiss Federal government, 2004 - 2011.
Peter RyserDr. Peter Ryser is a Professor Emeritus at the Swiss Federal Institute of Technology in Lausanne. He has over three decades of research and teaching experience from various corporate and academic institutions. He was previously a Director at Siemens Building Technologies where he was responsible for R&D, product innovation and patents. Dr. Ryser has a Ph.D. in applied Physics from the University of Geneva, a Masters degree in Experimental Physics and an MBA.
