Anton SchleissProf. Dr. Anton J. Schleiss graduated in Civil Engineering from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland, in 1978. After joining the Laboratory of Hydraulic, Hydrology and Glaciology at ETH as a research associate and senior assistant, he obtained a Doctorate of Technical Sciences on the topic of pressure tunnel design in 1986. After that he worked for 11 years for Electrowatt Engineering Ltd. (now Pöyry) in Zurich and was involved in the design of many hydropower projects around the world as an expert on hydraulic engineering and underground waterways. Until 1996 he was Head of the Hydraulic Structures Section in the Hydropower Department at Electrowatt. In 1997, he was nominated full professor and became Director of the Laboratory of Hydraulic Constructions (LCH) in the Civil Engineering Department of the Swiss Federal Institute of Technology Lausanne (EPFL). The LCH activities comprise education, research and services in the field of both fundamental and applied hydraulics and design of hydraulic structures and schemes. The research focuses on the interaction between water, sediment-rock, air and hydraulic structures as well as associated environmental issues and involves both numerical and physical modeling of water infrastructures. In May 2018, he became Honorary Professor at EPFL. More than 50 PhD and Postdoc research projects have been carried out under his guidance. From 1999 to 2009 he was Director of the Master of Advanced Studies (MAS) in Water Resources Management and Hydraulic Engineering held in Lausanne in collaboration with ETH Zurich and the universities of Innsbruck (Austria), Munich (Germany), Grenoble (France) and Liège (Belgium). From 2006 to 2012 he was the Head of the Civil Engineering program of EPFL and chairman of the Swiss Committee on Dams (SwissCOLD). In 2006, he obtained the ASCE Karl Emil Hilgard Hydraulic Price as well as the J. C. Stevens Award. He was listed in 2011 among the 20 international personalities that “have made the biggest difference to the sector Water Power & Dam Construction over the last 10 years”. Between 2014 and 2017 he was Council member of International Association for Hydro-Environment Engineering and Research (IAHR) and he was chair of the Europe Regional Division of IAHR until 2016. For his outstanding contributions to advance the art and science of hydraulic structures engineering he obtained in 2015 the ASCE-EWRI Hydraulic Structures Medal. The French Hydro Society (SHF) awarded him with the Grand Prix SHF 2018. After having served as vice-president between 2012 and 2015 he was president of the International Commission on Large Dams (ICOLD) from 2015 to 2018. On behalf of ICOLD he his the coordinator of the EU Horizon 2020 project "Hydropower Europe". With more than 40 years of experience he is regularly involved as a consultant and expert in large water infrastructures projects including hydropower and dams all over the world. Awards (besides those mentioned above): ASCE-Journal of Hydraulic Engineering Outstanding Reviewer Recognition 2013 ASCE-EWRI-Journal of Hydraulic Engineering 2014 Best Technical Note
Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Berend SmitBerend Smit received an MSc in Chemical Engineering in 1987 and an MSc in Physics both from the Technical University in Delft (the Netherlands). He received in 1990 cum laude PhD in Chemistry from Utrecht University (the Netherlands). He was a (senior) Research Physicists at Shell Research from 1988-1997, Professor of Computational Chemistry at the University of Amsterdam (the Netherlands) 1997-2007.
In 2004 Berend Smit was elected Director of the European Center of Atomic and Molecular Computations (CECAM) Lyon France. Since 2007 he is Professor of Chemical Engineering and Chemistry at U.C. Berkeley and Faculty Chemist at Materials Sciences Division, Lawrence Berkeley National Laboratory. Since 2014 he has been director of the Energy Center at EPFL.
Christian Ludwig2005 - today: Adjunct Professor at EPFL in the field of Solid Waste Treatment and head of the Chemical Processes and Materials research group (CPM) at Paul Scherrer Institute (PSI). Joint EPFL-PSI Professorship on Solid Waste Treatment. 2000 - today: Head, Group of Chemical Processes and Materials (CPM) at Paul Scherrer Institut (PSI). In 2009 the LEM unit was closed and the CPM group is now affiliated to the Bioenergy and Catalysis Laboratory (LBK) of the Energy and Environment Research Division (ENE). Since June 2002 permanent position ("tenure"). 1997 - 1999: Senior Scientist. Paul Scherrer Institut (PSI), General Energy Research Department, Element Cycles Section. 1995 - 1997: Research Fellow. Swiss Federal Institute for Environmental Science and Technology (EAWAG), Department of Resource and Waste Management. 1993 - 1995: Post-doc Fellow. University of California Davis, Department of Land, Air, and Water Resources (LAWR). 1990 - 1993: PhD Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry. 1989 - 1990: Master Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry.
Daniele MariDaniele Mari was born in Milan in 1961, After a scientific high school degree obatained in Italy Daniele Mari joins EPFL in 1980 and graduates in Physics in 1986. In 1991, he obtains the Ph.D. from the same institution working in the field of metal-ceramic composites. From 1992 to 1993 he continues his research as a post-doc at the Massachusetts Institute of Technology with a work on shape-memory alloys. In 1993, he joins the company Amysa Yverdon SA (Switzerland) as director of Research and Development and creates ACME (Advanced Composite & Microwave Engineering) with activities in the fields of the electromagnetic heating and materials science. In parallel with his industrial activities, D. Mari has supervised different research projects in materials science at the EPFL. In 2004 he joins the Laboratoire de Physique de la Matière Complexe to develop mechanical spectroscopy in the field of hard materials and steels. He is appointed MER in 2012. Since then he is responsible for the Physics Laboratories (for student training) and Auditoriums. Since 2013 D. Mari is the Deputy Director of the Physics School.
Olivier SchneiderAprès une thèse en physique des particules à l'Université de Lausanne, soutenue en 1989, Olivier Schneider rejoint le LBL, Lawrence Berkeley Laboratory (Californie), pour travailler sur l'expérience CDF au Tevatron de Fermilab (Illinois), d'abord au bénéfice d'une bourse de chercher débutant du Fonds National Suisse pour la Recherche Scientifique, puis comme post-doc au LBL. Il participe à la construction et à la mise en service du premier détecteur de vertex au silicium fontionnant avec succès auprès d'un collisionneur hadronique, détecteur qui a permis la découverte du sixième quark, appelé "top". Dès 1994, il revient en Europe et participe à l'expérience ALEPH au grand collisionneur électron-positon du CERN (Genève), comme boursier puis comme titulaire d'un poste de chercheur au CERN. Il se spécialise en physique des saveurs lourdes. En 1998, il est nommé professeur associé à l'Université de Lausanne, puis professeur extraordinaire à l'EPFL en 2003, et enfin professeur ordinaire à l'EPFL en 2010. Ayant participé depuis 1997 à la préparation de l'expérience LHCb au collisionneur LHC du CERN, entrée en fonction à fin 2009, il en analyse maintenant les données. Il contribue aussi depuis 2001 à l'exploitation des données enregistrées par l'expérience Belle au laboratoire KEK (Tsukuba, Japon). Ces deux expériences étudient principalement les désintégrations de hadrons contenant un quark b, ainsi que la violation de CP, c'est-à-dire le non-respect de la symétrie entre matière et antimatière.
Alfred RuferOriginaire de Diessbach (BE), Alfred Rufer est né en 1951. Il obtient en 1976 le diplôme d'ingénieur électricien de l'EPFL et poursuit son activité dans le même établissement en tant qu'assistant à la chaire d'électronique industrielle. En 1993, il est nommé professeur-assistant au Laboratoire d'électronique industrielle. Au début 1996, il est nommé professeur extraordinaire. En 1978, il débute son activité dans l'industrie de l'électronique de grande puissance à la société ABB, Asea Brown Boveri à Turgi, où il contribue au développement d'entraînements réglés à fréquence variable. Dès 1985, il exerce la fonction d'assistant technique et de chef de groupe. De 1988 à 1991, il poursuit le développement de nouveaux systèmes d'électronique de puissance dans différents domaines d'application. A. Rufer est l'auteur et co-auteur de plusieurs demandes de brevet, ainsi que de plusieurs publications. De 1991 à 1992, il est chef d'un département de développement d'appareils d'électronique de réglage et de commande pour l'électronique de puissance. Durant son activité professionnelle dans l'industrie, il participe activement à l'enseignement technique dans plusieurs écoles d'ingénieurs.
