Kamiar AminianKamiar Aminian received the M.S. degree in electrical engineering in 1982, the Ph.D degree in biomedical engineering in 1989 and the Postgraduate degree on technical computing in 1993 from Ecole Polytechnique Fédérale de Lausanne (EPFL). He was assistant professor (1994-1996) with Sharif University of Technology (Tehran). He joint EPFL in 1996 where he is currently Professor of medical instrumentation and the director of the Laboratory of Movement Analysis and Measurement in the Institute of Bioengineering of EPFL. His research interests include methodologies for human movement monitoring and analysis in real world conditions mainly based on wearable technologies and inertial sensors with emphasis on gait, physical activity and sport. His research aims to perform outcome evaluation in orthopaedics, to improve motor function and intervention programs in aging and patients with movement disorders and pain, and to identify metrics of performance in sport science.
Kamiar Aminian is a member of the International Society of Posture and Gait Research, the Institute of Electrical and Electronics Engineers, the European Society of Movement Analysis in Adults and Children, the Prevention of fall Network Europe, the Intentional Society of Biomechanics and the President of the 3D analysis of the human movement group. He is author or co-author of more than 450 scientific papers published in reviewed journals and presented at international conferences and holds 10 patents related to medical devices.
Full CV
ORCID
David Atienza AlonsoDavid Atienza Alonso is an associate professor of EE and director of the Embedded Systems Laboratory (ESL) at EPFL, Switzerland. He received his MSc and PhD degrees in computer science and engineering from UCM, Spain, and IMEC, Belgium, in 2001 and 2005, respectively. His research interests include system-level design methodologies for multi-processor system-on-chip (MPSoC) servers and edge AI architectures. Dr. Atienza has co-authored more than 350 papers, one book, and 12 patents in these previous areas. He has also received several recognitions and award, among them, the ICCAD 10-Year Retrospective Most Influential Paper Award in 2020, Design Automation Conference (DAC) Under-40 Innovators Award in 2018, the IEEE TCCPS Mid-Career Award in 2018, an ERC Consolidator Grant in 2016, the IEEE CEDA Early Career Award in 2013, the ACM SIGDA Outstanding New Faculty Award in 2012, and a Faculty Award from Sun Labs at Oracle in 2011. He has also earned two best paper awards at the VLSI-SoC 2009 and CST-HPCS 2012 conference, and five best paper award nominations at the DAC 2013, DATE 2013, WEHA-HPCS 2010, ICCAD 2006, and DAC 2004 conferences. He serves or has served as associate editor of IEEE Trans. on Computers (TC), IEEE Design & Test of Computers (D&T), IEEE Trans. on CAD (T-CAD), IEEE Transactions on Sustainable Computing (T-SUSC), and Elsevier Integration. He was the Technical Program Chair of DATE 2015 and General Chair of DATE 2017. He served as President of IEEE CEDA in the period 2018-2019 and was GOLD member of the Board of Governors of IEEE CASS from 2010 to 2012. He is a Distinguished Member of ACM and an IEEE Fellow.
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Tomas Teijeiro CampoI received my PhD from the Centro Singular de Investigación en Tecnoloxías Intelixentes (CITIUS), University of Santiago de Compostela, Spain, in 2017. During my doctoral studies I developed a novel knowledge-based framework for time series interpretation based on abductive reasoning that has been successfully applied to automatic ECG interpretation and classification. Now I am currently working as a research associate at the Embedded Systems Laboratory (ESL), with Prof. David Atienza. My research interests include knowledge representation, non-monotonic temporal reasoning, event-based sensing, and their application to biosignal abstraction and interpretation in energy-efficient setups.
Dario FloreanoProf. Dario Floreano is director of the Laboratory of Intelligent Systems at the Swiss Federal Institute of Technology Lausanne (EPFL). Since 2010, he is the founding director of the Swiss National Center of Competence in Robotics, a research program that brings together more than 20 labs across Switzerland. Prof. Floreano holds an M.A. in Vision, an M.S. in Neural Computation, and a PhD in Robotics. He has held research positions at Sony Computer Science Laboratory, at Caltech/JPL, and at Harvard University. His main research interests are Robotics and A.I. at the convergence of biology and engineering. Prof. Floreano made pioneering contributions to the fields of evolutionary robotics, aerial robotics, and soft robotics. He served in numerous advisory boards and committees, including the Future and Emerging Technologies division of the European Commission, the World Economic Forum Agenda Council, the International Society of Artificial Life, the International Neural Network Society, and in the editorial committee of several scientific journals. In addition, he helped spinning off two drone companies (senseFly.com and Flyability.com) and a non-for-profit portal on robotics and A.I. (RoboHub.org). Books
Manuale sulle Reti Neurali, il Mulino (in Italian), 1996 (first edition), 2006 (second edition)Evolutionary Robotics, MIT Press, 2000
Bio-Inspired Artificial Intelligence, MIT Press, 2008
Flying Insects and Robots, Springer Verlag, 2010
Mihai Adrian IonescuD'origine et de nationalités roumaine et suisse, Mihai-Adrian Ionescu est né en 1965. Après le doctorat en Physique des Composants à Semiconducteurs de lInstitut National Polytechnique de Grenoble, M. Ionescu a travaillé comme chercheur post-doctoral au LETI-CEA Grenoble, sur la caractérisation des diélectriques low-k pour les technologies submicroniques CMOS. Après une courte période au sein du CNRS, comme chargé de recherche 1ere Classe il a effectué un séjour post-doctoral au Center for Integrated Systems, Stanford University, USA. Actuellement il est Professeur Nanoélectronique à lEcole Polytechnique Fédérale de Lausanne.
Sandro CarraraSandro Carrara a été nommé IEEE Fellow pour ses remarquables réalisations dans le domaine de la conception de biocapteurs CMOS à l'échelle nanométrique. Il a également reçu le prix "IEEE Sensors Council Technical Achievement Award" en 2016 pour son leadership dans le domaine émergent du co-design des interfaces Bio/Nano/CMOS. Il est un Professeur titulaire à l' EPFL à Lausanne (Suisse) et responsable du groupe de recherche "Bio/CMOS Interfaces" (BCI). Il est ancien professeur de biocapteurs optiques et électriques au Département de génie électrique et de biophysique (DIBE) de l'Université de Gênes (Italie) et ancien professeur de nanotechnologie à l'Université de Bologne (Italie). Il est titulaire d'un doctorat en biochimie et de biophysique de l'Université de Padoue (Italie), une master en physique de l'Université de Gênes (Italie), et un diplôme en électronique de l'Institut National de Technologie à Albenga (Italie). Ses intérêts scientifiques sont sur les phénomènes électriques de films nano-bio-structuré, et comprennent CMOS conception de biopuces à base de protéines et de l'ADN. Le long de sa carrière, il a publié 7 livres, l'un comme auteur avec Springer sur les interfaces Bio/CMOS et, plus récemment, un manuel de bioélectronique avec La prestigieuse Cambridge University Press. Il a également publié plus de 250 articles scientifiques et est l'auteur de 13 brevets. Il est maintenant chef rédacteur du Journal IEEE Sensors; il est également fondateur et chef rédacteur du Journal BioNanoScience par Springer, et rédacteur adjoint de IEEE Transactions on Circuits and Biomedical Systems. Il est membre du IEEE Sensors Council et de son comité exécutif. Il était membre du Conseil des gouverneurs de la IEEE Circuits And Systems Society (CASS). Il a été nommé IEEE conférencier émérite pour les années 2017-2019 pour le Conseil IEEE Sensors, et de la société CASS pour les années 2013-2014. Son travail a reçu plusieurs reconnaissances internationales: plusieurs Top-25 Hottest-articles (2004, 2005, 2008, 2009, et deux fois en 2012) publiés dans des journaux internationales très fort impact telles que Biosensors and Bioelectronics, Sensors And Actuators B, IEEE Sensors, et Thin Solid Films; un Award à une conference de l'OTAN en 1996 pour la contribution originale à la physique de la conductivité à électron unique dans les nano-particules; six "Best Paper Awards" pour des articles présentés à la conférence IEEE Sensors Conference en 2019 (Montreal), IEEE NGCAS en 2017 (Genoa), MOBIHEALTH en 2016 (Milan), IEEE PRIME en 2015 (Glasgow), en 2010 (Berlin) et en 2009 (Cork), un prix de la meilleure affiche au rencontre annuel de Nanotera en 2011 (Berne), et un prix de la meilleure affiche au NanoEurope Symposium en 2009 (Rapperswil). De 1997 à 2000, il a été membre d'un comité international au ELETTRA Synchrotron à Trieste. De 2000 à 2003, il était responsable scientifique d'un Programme national de recherche (PNR) dans le dépôt de nanobiotechnologie. Il était un expert internationalement estimé du comité d'évaluation de l'Académie de Finlande dans un programme de recherche pour les années 2010-2013. Il a été le président général (General Chair) de la Conférence IEEE BioCAS 2014, le premier conférence internationale dans le domaine des circuits et des systèmes pour les applications biomédicales.
