Recherche

Afficher tous les résultats pour

Accueil

Catégorie

Soudage

Applied sciences
Génie chimique
Science des matériaux
Soudage

Publications associées (28)

À propos
Confidentialité
Mentions légales

Graph Chatbot

Experimental Investigation of Instability-Free Welded Moment Connections With Simplified Weld Details

Dimitrios Lignos, Andronikos Skiadopoulos

In capacity designed steel moment resisting frames, inelastic deformations are mostly concentrated in the steel beams and the column fixed ends of the first story. This design concept limits the participation of the column web’s panel zone in the energy di ...

2023

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Simultaneous strength and ductility enhancement of wire-arc directed energy deposited Al-Cu alloy by interlayer laser shock peening

Yandong Jing, Ke Huang

Wire-arc directed energy deposition (wire-arc DED), recognized for its ability to produce large-scale parts, has gained considerable attention. However, a critical issue with this method is the high prevalence of internal porosity defects found in the manu ...

Elsevier Science Sa2023

Hysteretic behaviour of welded connections with highly inelastic panel zones

Dimitrios Lignos, Andronikos Skiadopoulos

The current practice in capacity-designed steel moment resisting frames (MRFs) worldwide allows for limitedshear yielding in the column web panel zone. As such, inelastic deformations concentrate near the beam ends, thereby leading to flexural stre ...

Ernst & Sohn2023

Full-scale testing of European steel beams with reduced beam section under reversed cyclic loading

Dimitrios Lignos, Hiroyuki Inamasu

Steel beams with reduced beam section (RBS) are often used as part of prequalified connections in seismic regions. However, RBS connections are not as common in Europe. Reasons relate to easiness in fabrication, which requires on-site welding, and the seis ...

Springer Nature2022

Realistic Modelling of Dynamics at Nanostructured Interfaces Relevant to Heterogeneous Catalysis

Kevin Rossi

The focus of this short review is directed towards investigations of the dynamics of nanostructured metallic heterogeneous catalysts and the evolution of interfaces during reaction-namely, the metal-gas, metal-liquid, and metal-support interfaces. Indeed, ...

MDPI2022

Experimental Investigation of the Inelastic Cyclic Behavior of Concrete-Filled Double-Skin Tubular Beam-Columns with Corrugated Inner Skins and Ultrahigh-Strength Corner Tubes

Dimitrios Lignos, Mojtaba Farahi

This paper presents the experimental results from nine full-scale concrete-filled double-skin tubular (CFDST) beam-columns. The test specimens exploited two fabrication strategies, featuring either hollow steel inner skins with corrugated geometry or ultra ...

ASCE-AMER SOC CIVIL ENGINEERS2022

Generation of elastic geodesic gridshells with anisotropic cross sections

Corentin Jean Dominique Fivet, Nicolas Robin Montagne, Olivier Baverel

Geodesic gridshells are shell structures made of continuous elements following geodesic lines. Their properties ease the use of beams with anisotropic cross-sections by avoiding bending about their strong axis. However, such bending may arise when flatteni ...

2021

Reliability analysis of welded stud shear connectors on simply-supported bridge girders

Scott Walbridge, Matthew James Sjaarda

This paper examines the reliability of welded stud shear connectors for steel-concrete composite bridge girders. A finite element model of a simply-supported bridge was created featuring link connector elements representing the shear studs between beam and ...

CANADIAN SCIENCE PUBLISHING2021

Experimental Evaluation of Steel Columns under Seismic Hazard-Consistent Collapse Loading Protocols

Dimitrios Lignos

This paper presents results from 21 large-scale experiments on steel columns that examined their collapse behavior as related to steel moment resisting frames (MRFs). The test specimens included wide-flange and square hollow structural shapes (HSS) and wer ...

2021

Page 1 sur 3

Experimental Investigation of the Inelastic Cyclic Behavior of Concrete-Filled Double-Skin Tubular Beam-Columns with Corrugated Inner Skins and Ultrahigh-Strength Corner Tubes

Dimitrios Lignos, Mojtaba Farahi

ASCE-AMER SOC CIVIL ENGINEERS2022

Generation of elastic geodesic gridshells with anisotropic cross sections

Corentin Jean Dominique Fivet, Nicolas Robin Montagne, Olivier Baverel

2021

Experimental Evaluation of Steel Columns under Seismic Hazard-Consistent Collapse Loading Protocols

Dimitrios Lignos

2021

Simultaneous strength and ductility enhancement of wire-arc directed energy deposited Al-Cu alloy by interlayer laser shock peening

Yandong Jing, Ke Huang

Elsevier Science Sa2023