Oxygen evolution | EPFL Graph Search

Oxygen evolution is the process of generating molecular oxygen (O2) by a chemical reaction, usually from water. Oxygen evolution from water is effected by oxygenic photosynthesis, electrolysis of water, and thermal decomposition of various oxides. The biological process supports aerobic life. When relatively pure oxygen is required industrially, it is isolated by distilling liquefied air. Oxygen evolution in nature Oxygen evolving complex Photosynthetic oxygen evolution is the fundamental process by which oxygen is generated in the earth's biosphere. The reaction is part of the light-dependent reactions of photosynthesis in cyanobacteria and the chloroplasts of green algae and plants. It utilizes the energy of light to split a water molecule into its protons and electrons for photosynthesis. Free oxygen, generated as a by-product of this reaction, is released into the atmosphere. Water oxidation is catalyzed by a manganese-containing cofactor contained in ph

Oxygen evolution reaction catalyzed by first-row transition metal oxides: stability and mechanism

Aliki Moysiadou

Water splitting offers the opportunity for storing solar energy and, thus, producing carbon-neutral and renewable solar fuels. The process, known as artificial photosynthesis, is limited by the electrocatalytic conversion of water into molecular oxygen. Electrocatalysts are essential for reducing energy losses and improving the efficiency of the oxygen evolution reaction. This thesis describes the catalytic properties of first-row transition metal oxides for the OER and provides new insights into the mechanism of the reaction. Decades of research have yielded various transition metal oxides as efficient electrocatalysts for the OER, yet their stability is not well established. Here, a combination of techniques was employed to investigate the stability of unary, and mixed metal oxides; electrochemical activity measurements, electrochemical quartz crystal microbalance, inductively coupled plasma optical emission spectrometry and electrochemical impedance spectroscopy. The change of mass, composition, and activity metrics over time resolved the stability profiles of CoOx, CoFeOx, CoFeNiOx, NiOx, and NiFeOx. According to ICP-OES, the composition of all the five catalysts changed over time, while the CoOx and CoFeOx exhibited the most significant mass loss during an initial period of electrolysis. During a dynamic exchange of metal ions between the catalyst and the electrolyte, cobalt ions dissolve into the electrolyte, and iron from the electrolytic solution incorporates into the catalytic film. Once this dynamic exchange reaches equilibrium, the catalysts are stable. The mechanism of the OER mediated by amorphous cobalt oxyhydroxide was investigated by in situ spectroscopic and electrokinetic experiments. In situ surface-enhanced Raman and X-ray absorption spectroscopy supported a Co(IV)-O species at potentials before the onset of OER. The gradual transformation of the catalyst into a CoO2 concurred with the appearance of a superoxidic species. In situ SERS coupled with 18O and H/D isotope experiments provided evidence for the participation of the superoxidic species in the oxygen evolution reaction. The catalyst exhibits a Tafel slope of 60 mV/dec, a first-order dependence of the catalytic activity, and a proton-coupled electron-transfer pre-equilibrium. These findings propose a new OER mechanism, in which the rate-determining step is the release of oxygen from a Co-superoxo intermediate. Iron incorporation into the cobalt lattice enhances the catalytic activity greatly. Even though there are several studies on the OER mechanism in Co-Fe oxides, many vital questions on the role of iron, the true nature of active sites, and the oxidation states of Co and Fe remain. In situ SERS and XAS indicated the presence of Co(IV)-O species and a Fe valency higher than three at potentials prior to the oxygen evolution. An O-O- band, attributed to the superoxidic species, emerged at potentials lower than the onset of OER. In situ SERS coupled with 18O isotope experiments confirmed that both the lattice oxygen and superoxidic species participate in the oxygen evolution. The Tafel slope is about 37 mV/dec indicating that both the pre-equilibrium and rate-determining step involve a single-electron transfer. These findings support that neither the Co(III)/Co(IV) oxidation nor the O-O bond formation are controlling the rate of the reaction.

EPFL2020

Chemical and electrochemical promotion of supported rhodium catalyst

Olena Baranova

The chemical and electrochemical promotion of highly dispersed nanofilm Rh catalysts (dispersion: about 10 %, film thickness: 40 nm) has been investigated for the first time. To this end Rh metal was sputter-deposited, either on a purely ionic conductor (8 % Y2O3-stabilized ZrO2) or on a mixed ionic-electronic conductor (TiO2), the latter being a highly dispersed layer of TiO2 (4 µm) deposited on YSZ. These catalysts are designated as Rh/YSZ and Rh/TiO2/YSZ, respectively. It was established analytically that both in the Rh/YSZ and in the Rh/TiO2/YSZ system, the catalyst films have a nanoparticle-size grain structure. The Rh supported on titania is rather porous, exhibiting a higher dispersion and surface area than Rh on YSZ. Both after reduction (H2, T=400 °C) and after oxidation (O2, T=400 °C), Rh supported on TiO2 was found to be in a more highly reduced state than Rh on YSZ. After reducing treatment, the Rh/TiO2/YSZ samples contain a larger amount of weakly bonded oxygen, which can be attributed to oxygen "backspillover" from the TiO2. A major feature of this research was the electrochemical characterization of the oxygen/Rh/solid electrolyte three-phase boundary by steady-state polarization measurements and by impedance spectroscopy. These are powerful techniques for extracting experimental trends and details that are useful for an understanding of the electrochemical promotion principles. It was shown that the exchange current densities at the Rh/solid electrolyte interface are lower on account of the TiO2 layer. The exchange current densities are more than twice lower at Rh/TiO2(4 µm)/YSZ than at Rh/YSZ, demonstrating that the former interface is much more polarizable. The mechanism of oxygen exchange occurring close to equilibrium (O2/O2- couple) was investigated for the first time at Rh catalyst electrodes interfaced with solid electrolyte. The processes of cathodic oxygen reduction and anodic oxygen evolution are not symmetric, but they are similar in the two systems, Rh/YSZ and Rh/TiO2(4 µm)/YSZ. The cathodic process consists of three steps: dissociative adsorption of oxygen at the gas-exposed Rh surface, atomic oxygen diffusion to the electrochemical reaction sites (ERS), and a two-electron transfer to this oxygen on the ERS. The cathodic process is limited by interfacial diffusion of oxygen atoms from the gas-exposed metal surface to the ERS. The anodic process includes two steps: two-electron transfer reaction, which is the rate-determining step, and oxygen desorption to the gas phase. With data obtained from impedance spectroscopy at the equilibrium potential, it was possible to confirm the reaction scheme proposed. It was demonstrated that Rh nanofilm catalysts interfaced with YSZ or TiO2/YSZ can be electrochemically promoted for the reaction of ethylene oxidation. Small anodic currents cause periodic oscillations in catalytic rate and potential of the Rh/YSZ catalyst, while at Rh/TiO2/YSZ they give rise to a stable and reversible rate enhancement by up to a factor 80. The increase in ethylene oxidation rate is up to 2000 times larger than the electrochemical rate, I/2F, of O2- oxidation. The pronounced electrochemical promotion behavior that has been observed is due to the anodically controlled migration of O2- species from the electrolyte to the Rh/gas interface. At the Rh surface, these species destabilize the formation of rhodium surface oxide (Rh2O3). The existence of backspillover oxygen species has been confirmed by impedance measurements under positive applied potential. Another significant result for heterogeneous catalysis is the finding that thick as well as thin films of Rh/TiO2/YSZ catalyst are open to chemical promotion of ethylene oxidation and partial methane oxidation, ie, they offer a higher catalytic activity and stability than the Rh/YSZ catalysts. The modification of catalytic activity observed for Rh/TiO2/YSZ was attributed to either a "long-range" electronic-type SMSI mechanism or to a self-driven electrochemical promotion mechanism. In both cases, the ultimate cause of promotion are different work functions of catalyst and support. Equilibration of the work functions of two solids in contact induces surface charging, a migration of O2- ions to the catalyst/gas interface, and a weakening of the Rh-O chemisorptive bonds. It facilitates reduction of oxidized surface sites. Another important achievement of the present work was that of exploring and confirming the possibilities of current-assisted activation of Rh/TiO2/YSZ catalysts. In partial methane oxidation using close to stoichiometric gas compositions (CH4 : O2 = 2 : 1) at 550 °C, the inactive (oxidized) Rh/TiO2/YSZ catalyst was successfully activated by applied currents, either positive or negative. This phenomenon is an example of "permanent" electrochemical promotion furnishing a permanent rate enhancement ratio of γ = 11. The activation by negative currents is explained in terms of an electrochemical reduction of rhodium surface oxide, while the activation by positive currents can be explained by the mechanism of electrochemical promotion.

EPFL2005

Mechanochemical synthesis of novel rutile-type high entropy fluorides for electrocatalysis

Parvathy Anitha Sukkurji, Seunghwa Lee, Kai Wang

Multicomponent rutile (P42/mnm) structured fluorides, containing 4 to 7 transition metals (Co, Cu, Mg, Ni, Zn, Mn, and Fe) in equiatomic ratios, were synthesized using a simple mechanochemical approach. The high entropy fluorides were characterized using different techniques, all of which indicate that the high entropy fluorides tend to crystallize into a homogeneously mixed solid solution and single-phase structure. These high entropy fluorides represent an additional class of high entropy ceramics, which have recently attracted attention especially due to the development of high entropy oxides. With the introduction of these novel high entropy fluorides, similar interest could be generated due to the variety of different applications for fluoride materials and the improvements the high entropy concept might bring. Here we present an indepth characterization study and the potential application of high entropy fluorides as a catalyst for the oxygen evolution reaction, in which the high entropy fluorides do show increased performance compared to a state-of-the-art catalyst for the oxygen evolution reaction, IrO2, despite eliminating noble metal constituents.

2021