Personnes associées (164)
Martinus Gijs
Martin A.M. Gijs received his degree in physics in 1981 from the Katholieke Universiteit Leuven, Belgium and his Ph.D. degree in physics at the same university in 1986. He joined the Philips Research Laboratories in Eindhoven, The Netherlands, in 1987. Subsequently, he has worked there on micro-and nano-fabrication processes of high critical temperature superconducting Josephson and tunnel junctions, the microfabrication of microstructures in magnetic multilayers showing the giant magnetoresistance effect, the design and realisation of miniaturised motors for hard disk applications and the design and realisation of planar transformers for miniaturised power applications. He joined EPFL in 1997. His present interests are in developing technologies for novel magnetic devices, new microfabrication technologies for microsystems fabrication in general and the development and use of microsystems technologies for microfluidic and biomedical applications in particular.
Philippe Renaud
Philippe Renaud is Professor at the Microsystem Laboratory (LMIS4) at EPFL. He is also the scientific director of the EPFL Center of MicroNanoTechnology (CMI). His main research area is related to micronano technologies in biomedical applications (BioMEMS) with emphasis on cell-chips, nanofluidics and bioelectronics. Ph. Renaud is invloved in many scientifics papers in his research area.  He received his diploma in physics from the University of Neuchâtel (1983) and his Ph.D. degree from the University of Lausanne (1988). He was postdoctoral fellow at University of California, Berkeley (1988-89) and then at the IBM Zürich Research Laboratory in Switzerland (1990-91). In 1992, he joined the Sensors and Actuators group of the Swiss Center for Electronics and Microtechnology (CSEM) at Neuchâtel, Switzerland. He was appointed assistant professor at EPFL in 1994 and full professor in 1997. In summer 1996, he was visiting professor at the Tohoku University, Japan.  Ph. Renaud is active in several scientific committee (scientific journals, international conferences, scientific advisory boards of companies, PhD thesis committee). He is also co-founder of the Nanotech-Montreux conference. Ph. Renaud is committed to valorization of basic research through his involvement in several high-tech start-up companies.
Nico de Rooij
Nico de Rooij is Professor Emeritus of EPFL and previous Vice-President of CSEM SA. He was Professor of Microengineering at EPFL and Head of the Sensors, Actuators and Microsystems Laboratory ( SAMLAB ) from 2009 to 2016. At CSEM SA he was responsible for the EPFL CSEM coordination from 2012 to 2016. His research activities include the design, micro fabrication and application of miniaturized silicon based sensors, actuators, and microsystems. He authored and coauthored over 400 published journal papers in these areas. He was Professor at the University of Neuchatel and Head of the Sensors, Actuators and Microsystems Laboratory (SAMLAB) from 1982 to 2008. Since October 1990 till October 1996 and again from October 2002 until June 2008, he has been the director of the Institute of Microtechnology of the University of Neuchatel (IMT UniNE). He lectured at the Swiss Federal Institute of Technology, Zurich (ETHZ), and since 1989, he has been a part-time professor at the Swiss Federal Institute of Technology, Lausanne (EPFL). He has been appointed Vice-President of the CSEM SA in February 2008 and headed the newly created Microsystems Technology Division of CSEM SA, from 2008 until 2012. He was Director of EPFL'’s Institute of Microengineering (EPFL STI IMT) from 2009 to 2012, following the transfer of IMT Uni-NE to EPFL. Dr. de Rooij is a Fellow of the IEEE and Fellow of the Institute of Physics (UK). He recieved the IEEE Jun-Ichi Nishizawa Gold Medal , the Schlumberger Prize as well as the MNE Fellow Award 2016 . He was awarded a Visiting Investigatorship Program (VIP) in MEMS/NEMS Systems by the A*STAR Science and Engineering Council (SERC) , Singapore, hosted by SIMTech , for the period 2005-2008. Prof. de Rooij is Corresponding Member of the Royal Netherlands Academy of Arts and Sciences and Individual Member of the Swiss Academy of Engineering Sciences . He has been serving on the Editorial Boards of the IEEE/ASME Journal of Microelectromechanical Systems (IEEE JMEMS) , the IEEE proceedings , the Journal of Micromechanics and Microengineering, JM & M, , the Sensors and Actuators ,and Sensors and Materials . He was Member of the Information and Communication technology jury of the BBVA Foundation Frontiers of Knowledge Awards from 2009 to 2012. Dr. de Rooij is (or was) Member of numerous international steering committees of conference series as well as technical paper review panels including the steering committee of the International Conference on Solid-State Sensors and Actuators and of Eurosensors. He acted as European Program Chairman of Transducers '87 and General Chairman of Transducers '89, Montreux, Switzerland. He has supervised more than 70 Ph.D. students, who have successfully completed their Ph.D. thesis. He received his M.Sc. degree in physical chemistry from the State University of Utrecht, The Netherlands, in 1975, and a Ph.D. degree from Twente University of Technology, The Netherlands, in 1978. From 1978 to 1982, he worked at the Research and Development Department of Cordis Europa N.V., The Netherlands.
Jürgen Brugger
I am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Sandro Carrara
Sandro Carrara a été nommé IEEE Fellow pour ses remarquables réalisations dans le domaine de la conception de biocapteurs CMOS à l'échelle nanométrique. Il a également reçu le prix "IEEE Sensors Council Technical Achievement Award" en 2016 pour son leadership dans le domaine émergent du co-design des interfaces Bio/Nano/CMOS. Il est un Professeur titulaire à l' EPFL à Lausanne (Suisse) et responsable du groupe de recherche "Bio/CMOS Interfaces" (BCI). Il est ancien professeur de biocapteurs optiques et électriques au Département de génie électrique et de biophysique (DIBE) de l'Université de Gênes (Italie) et ancien professeur de nanotechnologie à l'Université de Bologne (Italie). Il est titulaire d'un doctorat en biochimie et de biophysique de l'Université de Padoue (Italie), une master en physique de l'Université de Gênes (Italie), et un diplôme en électronique de l'Institut National de Technologie à Albenga (Italie). Ses intérêts scientifiques sont sur les phénomènes électriques de films nano-bio-structuré, et comprennent CMOS conception de biopuces à base de protéines et de l'ADN. Le long de sa carrière, il a publié 7 livres, l'un comme auteur avec Springer sur les interfaces Bio/CMOS et, plus récemment, un manuel de bioélectronique avec La prestigieuse Cambridge University Press. Il a également publié plus de 250 articles scientifiques et est l'auteur de 13 brevets. Il est maintenant chef rédacteur du Journal IEEE Sensors; il est également fondateur et chef rédacteur du Journal BioNanoScience par Springer, et rédacteur adjoint de IEEE Transactions on Circuits and Biomedical Systems. Il est membre du IEEE Sensors Council et de son comité exécutif. Il était membre du Conseil des gouverneurs de la IEEE Circuits And Systems Society (CASS). Il a été nommé IEEE conférencier émérite pour les années 2017-2019 pour le Conseil IEEE Sensors, et de la société CASS pour les années 2013-2014. Son travail a reçu plusieurs reconnaissances internationales: plusieurs Top-25 Hottest-articles (2004, 2005, 2008, 2009, et deux fois en 2012) publiés dans des journaux internationales très fort impact telles que Biosensors and Bioelectronics, Sensors And Actuators B, IEEE Sensors, et Thin Solid Films; un Award à une conference de l'OTAN en 1996 pour la contribution originale à la physique de la conductivité à électron unique dans les nano-particules; six "Best Paper Awards" pour des articles présentés à la conférence  IEEE Sensors Conference en 2019 (Montreal), IEEE NGCAS en 2017 (Genoa), MOBIHEALTH en 2016 (Milan), IEEE PRIME en 2015 (Glasgow), en 2010 (Berlin) et en 2009 (Cork), un prix de la meilleure affiche au rencontre annuel de Nanotera en 2011 (Berne), et un prix de la meilleure affiche au NanoEurope Symposium en 2009 (Rapperswil). De 1997 à 2000, il a été membre d'un comité international au ELETTRA Synchrotron à Trieste. De 2000 à 2003, il était responsable scientifique d'un Programme national de recherche (PNR) dans le dépôt de nanobiotechnologie. Il était un expert internationalement estimé du comité d'évaluation de l'Académie de Finlande dans un programme de recherche pour les années 2010-2013. Il a été le président général (General Chair) de la Conférence IEEE BioCAS 2014, le premier conférence internationale dans le domaine des circuits et des systèmes pour les applications biomédicales.

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.