Publications associées à Economics of nuclear power plants

Overview on the Applicability of the ITER/NPP-Like Technologies to the DEMO Plant Electrical System and Promising Alternatives

Damien Fasel, Zhe Chen, Hanwen Zhang, Elena Gaio, Alberto Ferro, Francesco Santoro

The Plant Electrical System (PES) of the European DEMOnstration fusion power plant (DEMO), presently under conceptual design, shall supply power to the loads and deliver net power to the Power Transmission Grid (PTG). Starting from the available requiremen ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Innovative thermophysical characterization of an ATF composite cladding: the case of silicon carbide

Andrea Cavaliere

Nuclear power is a powerful technology that plays an important role in the fight against climate change, and research is continuously engaged in studies that could further improve its safety. After the Fukushima accident, Accident Tolerant Fuels research h ...

EPFL2024

Wind farm power density optimization according to the area size using a novel self-adaptive genetic algorithm

Fernando Porté Agel, Nicolas Otto Kirchner Bossi

This work studies the power density (PD) optimization in wind farms, and its sensitivity to the available area size. A novel genetic algorithm (PDGA) is introduced, which optimizes PD and the turbine layout, by self-adapting to the PD and to the solutions ...

Pergamon-Elsevier Science Ltd2023

Investigation and Validation of Unstructured Mesh Methodologies for Modeling Experimental Reactors

Andreas Pautz, Mathieu Hursin, Carlo Fiorina, Tom Mager

This paper summarizes a methodology developed at Ecole Polytechnique Federale de Lausanne for the neutronic modeling of the CROCUS experimental reactor and proposes solutions to the challenges one may face while modeling a research reactor with a complex g ...

MDPI2022

A Wearable Low-Power Sensing Platform for Environmental and Health Monitoring: The Convergence Project

Mihai Adrian Ionescu, Thomas Ernst

The low-power sensing platform proposed by the Convergence project is foreseen as a wireless, low-power and multifunctional wearable system empowered by energy-efficient technologies. This will allow meeting the strict demands of life-style and healthcare ...

2021

Growth and viability of microorganisms in bentonite and their potential activity in deep geological repository environments

Niels Burzan

Radioactive waste is among the most dangerous anthropogenic waste and its safe disposal is a challenging multi-generational task. Many nations have sought for the peaceful application of nuclear fission for the reliable production of electric energy to pow ...

EPFL2021

Tuning the Size and Geometry of Heteroleptic Coordination Cages by Varying the Ligand Bent Angle

Rosario Scopelliti, Kay Severin, Farzaneh Fadaei Tirani, Rujin Li

Spherical assemblies of the type [PdnL2n]2n+ can be obtained from PdII salts and curved N-donor ligands, L. It is well established that the bent angle, α, of the ligand is a decisive factor in the self-assembly process, with larger angles leading to comple ...

2021

The COLIBRI experimental program in the CROCUS reactor: characterization of the fuel rods oscillator

Andreas Pautz, Vincent Pierre Lamirand, Mathieu Hursin, Carlo Fiorina, Oskari Ville Pakari, Pavel Frajtag, Axel Guy Marie Laureau, Adolfo Rais, Daniel Godat

The present article presents the mechanical characterization of the fuel rods oscillator developed for the purposes of the COLIBRI experimental program in CROCUS. COLIBRI aims at investigating the radiation noise related to fuel vibrations. The main motiva ...

2020

Experimental evaluation and modeling of fatigue of a 316L austenitic stainless steel in high-temperature water and air environments

Wen Chen

Austenitic stainless steels is used in many components of nuclear power plants, particularly in the pipes of cooling systems. Owing to power transients and to start-ups and shutdowns, these components are subjected to thermo-mechanical loadings (low-cycle ...

EPFL2020

Wearable Triboelectric Generator based on a Hybrid Mix of Carbon Nanotube and Polymer Layers

Jürgen Brugger

A novel single-layer structured triboelectric generator (TEG) is proposed with a hybrid mix of carbon nanotube (CNT) and silk. Here, the mixing of two materials in liquid phase for proven effective power generation is shown. In this research, CNT provides ...

IOP PUBLISHING LTD2019