Publications associées à Dental porcelain

Investigation of mycelium film as the adhesive for poplar veneer bonding: insight into interfacial bonding mechanisms

The emergence of mycelium-bonded biocomposites has been stimulated in the quest for sustainable development. These biocomposites exhibit enhanced mechanical properties through hot pressing, with mycelium playing a crucial role as both the adhesive and rein ...

Taylor & Francis Ltd2024

Probing the micromechanical strength of oxide ceramic composite reinforcements

Václav Pejchal

This work shows how one can probe the micromechanical strength of ceramic reinforcements used in metal matrix composites, which greatly influences the mechanical performance of the composite material yet has seldom been quantified with precision. More spec ...

EPFL2017

Self-Replenishing, Wear-Resistant and Anti-Sticking Surfaces Based on Liquid Impregnation of Microstructured Mesoporous α-AI₂O₃ [Alpha Alumina] Matrices

Sriharitha Rowthu

Fabrication of wear-resistant omniphobic surfaces is a persistent scientific challenge and essential for various applications such as in paint industries, fluid transport, antifouling, reduction of friction drag on ship hulls, and stain resistant textiles. ...

EPFL2016

Toward Knowledge-Based Grain-Boundary Engineering of Transparent Alumina Combining Advanced TEM and Atomistic Modeling

Paul Bowen, Cécile Hébert, Marco Cantoni, Michael Stuer, Farhang Nabiei, Abhishek Tewari

Transition element dopants (e.g., Y, La) are commonly used as sintering aids in polycrystalline alumina ceramics, which segregate to the grain boundaries and control the grain-boundary mobility. However, due to the extremely thin (

Wiley-Blackwell2015

On the micrometre precise mould filling of liquid polymer derived ceramic precursor for 300-µm-thick high aspect ratio ceramic MEMS

Jürgen Brugger, Rosario Maurizio Gullo, Jonas Grossenbacher

This paper describes a novel and scalable method for the fabrication of polymer derived ceramics (PDC) structures with high aspect ratio and micrometre scale features. Elastomeric micro-moulds composed of a filling pot are used to deliver via sacrificial m ...

Elsevier2015

Advances in the design of macroporous polymer scaffolds for potential applications in dentistry

Philippe Renaud, Thomas Michael Braschler, Sidi Ahmed Bencherif

A paradigm shift is taking place in medicine and dentistry from using synthetic implants and tissue grafts to a tissue engineering approach that uses degradable porous three-dimensional (3D) material hydrogels integrated with cells and bioactive factors to ...

2013

Atomistic Modeling of Processing Issues for Transparent Polycrystalline Alumina

Abhishek Tewari

Transparent polycrystalline alumina has many possible promising areas of application from jewelry and the watch industry to wave guides, energy economical lamp envelopes, and optical windows. Ultrahigh density, submicron sized grains and/or oriented micros ...

EPFL2013

Fabrication of polycrystalline (Y0.7Gd0.3)(2)O-3:Eu3+ ceramics: The influence of initial pressure and sintering temperature on its morphology and photoluminescence activity

Barbora Bártová

Nanocrystalline (Y0.7Gd0.3)(2)O-3 powder, synthetised via polymer complex solution method, was compacted into 25 pellets applying high pressures (173-867 MPa) for 30 s that were subsequently sintered at different temperatures (800-1400 degrees C) for 18 h. ...

2012

Micro-tubular Solid Oxide Fuel Cells with Nickelate Cathode-support

Henning Lübbe

The shortage of natural resources, rising energy demands and global warming have created an urgent need for more efficient energy conversion devices and different energy resources to achieve a more sustainable and efficient economy. Solid Oxide Fuel Cells ...

EPFL2012

High-temperature mechanical loss and creep behavior of fine-grained zirconia-containing nano-sized reinforcements

Robert Schaller, Claudia Ionascu

Polycrystalline zirconia (3Y-TZP grade) specimens unreinforced and reinforced with multiwalled carbon nanotubes (MWCNTs) or silicon carbide whiskers (SiCws) were processed by powder metallurgy and studied by mechanical spectroscopy. The high-temperature me ...

2009