Publications associées à Injecteur

Design and assessment of an evaporating water-cooled methanation reactor for a SOE-based power-to-methane system

The transition towards clean renewable energy sources, where wind and solar are prone to variation, requires adequate energy storage. Power-to-methane (PtM) systems can be part of the solution. Specifically, solid-oxide-electrolyser (SOE) based PtM systems ...

EPFL2024

Theoretical and Experimental Investigation of a 34 Watt Radial-Inflow Steam Turbine with Partial-Admission

Jan Van Herle, Jürg Alexander Schiffmann, Patrick Hubert Wagner

A micro steam turbine with a tip diameter of 15mm was designed and experimentally characterized. At the nominal mass flow rate and total-to-total pressure ratio of 2.3 kgh-1 and 2, respectively, the turbine yields a power of 34W and a total-to-static isent ...

2021

Microjoule-level widely tunable gain-switched thuliumdoped fiber laser

Camille Sophie Brès, Svyatoslav Kharitonov

We demonstrate the hybrid-pumped (continuous-wave+pulsed) gain-switched smallcore thulium-doped fiber laser tunable in 1825-2064nm spectral range that delivers 50-300ns pulses with energies up to 12μJ (65μJ of injected pump) reaching performance of larger- ...

OSA Publishing2019

Testing and modelling of a novel oil-free co-rotating scroll machine with water injection

Jürg Alexander Schiffmann, Luis Carlos Mendoza Toledo

Efficient compressed air energy storage requires reversible isothermal compression and expansion devices. The isothermal compression and expansion processes can either be approached by several stages with intercooling or by the more convenient injection of ...

Elsevier2017

Integration of Supercritical Water Gasification in Combined 1G/2G Ethanol Production

François Maréchal, Adriano Viana Ensinas, Alberto Mian

The present study investigates the potential conversion of sugarcane into ethanol and synthetic natural gas. The considered conversion path consists in combining ethanol first and second generation ethanol production plant with a catalytic supercritical wa ...

Aidic Servizi Srl2014

Infusion pump with phase separator

Arnaud Comment, Jacques Van Der Klink

An infusion pump comprising a substance and pushing fluid inlet, a substance outlet, a central chamber communicating with said inlet and said outlet, and injecting means for injecting a substance into a biological object, wherein the infusion pump further ...

2011

In-situ testing of a heat exchanger pile

Lyesse Laloui

The behavior of a pile subjected to thermo-mechanical loadings was studied in situ with the aim of quantifying the thermal influence on the bearing capacity of heat exchanger piles. A pile situated in a building under construction was equipped with a chann ...

ASCE2011

Effects of Swirl Velocities From Fan Assemblies Mounted on Lifting Surfaces

Alexandros Terzis, Charilaos Kazakos, Nikolaos Papadopoulos

The penetration of a jet of fluid into a traversal moving stream is a basic configuration of a wide range of engineering applications, such as film cooling and V/STOL aircrafts. This investigation examines experimentally the effect of blowing ratio of fans ...

2011

Qualitative evaluation of alkali release during the pyrolysis of biomass

Christian Ludwig, Alexander Wokaun

The thermochemical emission of alkali metals from biomass samples and two organic salts was investigated for the first time using a novel combination of a th ermogravi metric analyzer with a jet flow condenser attached to a surface ionization detector. Thi ...

2007

Can steam play a role in low to medium power from low temperature heat?

François Maréchal, Daniel Favrat, Jonathan Demierre

Rankine cycles for low to medium power and low temperature heat using water as working fluid, were almost written off. The main arguments speaking against them are reviewed in this paper and the conceptual design of the equipment entirely revisited. An adv ...

2006