Nucleate boiling

Applied sciences
Génie mécanique
Thermal engineering
Transfert thermique

Publications associées (27)

À propos
Confidentialité
Mentions légales

Graph Chatbot

Improving surface heat flux estimation for a large lake through model optimization and two-point calibration: The case of Lake Geneva

David Andrew Barry, Ulrich Lemmin, Damien Bouffard, Andrea Cimatoribus, Abolfazl Irani Rahaghi

Net Surface Heat Flux (SurHF) was estimated from 2008 to 2014 for Lake Geneva (Switzerland/France), using long‐term temperature depth profiles at two locations, hourly maps of reanalysis meteorological data from a numerical weather model and lake surface w ...

Association for the Sciences of Limnology and Oceanography (ASLO)2018

Hydration mediated interfacial transitions on mixed hydrophobic/hydrophilic nanodroplet interfaces

Sylvie Roke, Halil Ibrahim Okur, Nikolay Smolentsev, Rüdiger Scheu, Filip Kovacik

Interfacial phase transitions are of fundamental importance for climate, industry, and biological processes. In this work, we observe a hydration mediated surface transition in supercooled oil nanodroplets in aqueous solutions using second harmonic and sum ...

2018

Insulation effect on thermal stability of Coated Conductors wires in liquid nitrogen

Bertrand Dutoit, Bertrand Dutoit

Superconducting wires are not perfectly homogeneous in term of critical current as well as stabilization. In resistive fault current limiter applications this could lead to hot spots if the fault current is only slightly above the nominal current of the de ...

Iop Publishing Ltd2017

Flow Boiling Heat Transfer and Pressure Drops of R1234ze(E) in a Silicon Micro-pin Fin Evaporator

John Richard Thome, Mirco Magnini, Chiara Falsetti

The development of newer and more efficient cooling techniques to sustain the increasing power density of high-performance computing systems is becoming one of the major challenges in the development of microelectronics. In this framework, two-phase coolin ...

Asme2017

An updated three-zone heat transfer model for slug flow boiling in microchannels

John Richard Thome, Mirco Magnini

This work proposes a novel physics-based model for the fluid mechanics and heat transfer associated with slug flow boiling in horizontal circular microchannels to update the widely used three-zone model of Thome et al. (2004). The heat transfer model has a ...

Pergamon-Elsevier Science Ltd2017

Critical heat flux: Performance of R1234yf, R1234ze and R134a in an aluminum multi-minichannel heat sink at high saturation temperatures

John Richard Thome

In this paper, new saturated critical heat flux (CHF) values at medium-to-high saturation temperatures are presented for an aluminum multi-minichannel test section. Among the possible working fluids, R134a and the low GWP refrigerants R1234yf and R1234ze h ...

Elsevier France-Editions Scientifiques Medicales Elsevier2016

Flow boiling and frictional pressure gradients in plate heat exchangers. Part 2: Comparison of literature methods to database and new prediction methods

John Richard Thome, Raffaele Luca Amalfi, Farzad Vakili Farahani

In the second part of this study a sensitivity analysis on the prediction methods is performed to consider the effect of plate geometry on thermal hydraulic performance and an extensive comparison of all the two-phase pressure drop and flow boiling heat tr ...

Elsevier Sci Ltd2016

Local measurements and a new flow pattern based model for subcooled and saturated flow boiling heat transfer in multi-microchannel evaporators

John Richard Thome, Houxue Huang

A comprehensive experimental campaign has been conducted to measure the local heat transfer coefficients during flow boiling of refrigerants in multi-microchannel evaporators. Two additional refrigerants (R245fa and R236fa) were tested in two silicon evapo ...

Pergamon-Elsevier Science Ltd2016

Experimental investigation on flow boiling pressure drop and heat transfer of R1233zd(E) in a multi-microchannel evaporator

John Richard Thome, Navid Borhani, Houxue Huang

An experimental study on flow boiling pressure drop and heat transfer of a new environmentally friendly refrigerant R1233zd(E), in a parallel multi-microchannel evaporator was carried out. The silicon microchannels evaporator was 10 mm long and 10 mm wide, ...

Pergamon-Elsevier Science Ltd2016

Unified Modeling Suite for Two-Phase Flow, Convective Boiling, and Condensation in Macro- and Microchannels

John Richard Thome, Andrea Cioncolini

This paper focuses on the unified modeling suite for annular flow that the authors have developed and continue to develop. The annular flow suite currently includes models to predict the void fraction, the entrained liquid fraction, and the wall shear stre ...

Taylor & Francis Inc2016

Page 2 sur 3