A culvert is a structure that channels water past an obstacle or to a subterranean waterway. Typically embedded so as to be surrounded by soil, a culvert may be made from a pipe, reinforced concrete or other material. In the United Kingdom, the word can also be used for a longer artificially buried watercourse.
Culverts are commonly used both as cross-drains to relieve drainage of ditches at the roadside, and to pass water under a road at natural drainage and stream crossings. When they are found beneath roads, they are frequently empty. A culvert may also be a bridge-like structure designed to allow vehicle or pedestrian traffic to cross over the waterway while allowing adequate passage for the water. Dry culverts are used to channel a fire hose beneath a noise barrier for the ease of firefighting along a highway without the need or danger of placing hydrants along the roadway itself.
Culverts come in many sizes and shapes including round, elliptical, flat-bottomed, open-bottomed, pear-shaped, and box-like constructions. The culvert type and shape selection is based on a number of factors including requirements for hydraulic performance, limitations on upstream water surface elevation, and roadway embankment height.
The process of removing culverts to restore an open-air watercourse is known as daylighting. In the UK, the practice is also known as deculverting.
Culverts can be constructed of a variety of materials including cast-in-place or precast concrete (reinforced or non-reinforced), galvanized steel, aluminum, or plastic (typically high-density polyethylene). Two or more materials may be combined to form composite structures. For example, open-bottom corrugated steel structures are often built on concrete footings.
Construction or installation at a culvert site generally results in disturbance of the site's soil, stream banks, or stream bed, and can result in the occurrence of unwanted problems such as scour holes or slumping of banks adjacent to the culvert structure.
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Sustainable freshwater and urban drainage system are considered.
For fresh water, the capture, reservoir and net are discussed.
For the drainage, hydrology as well as the individual conduit and manh
The hydropower potential in Africa is only very few exploited. The large rivers like Zambezi River still have considerable possibilities for installing further hydropower projects including the creation of reservoirs by large dams. The main African watersh ...
EPFL - LCH2013
, ,
We investigate vegetation uprooting by flow for Avena sativa seedlings with stem-to-sediment size ratio close to unity and vanishing obstacle-induced scouring. By inducing parallel riverbed erosion within an experimental flume, we measure the time-to-uproo ...
2015
, ,
Piano key weirs (PKWs) are a weir type characterized by an effective rating curve. Accordingly, this control structure is primarily applied at dams to increase the spillway capacity. In recent years, PKWs also have been implemented in rivers combined with ...