Publications associées à Câblier

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Federica Demattè, Chiara Frittitta

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Robust Analog Multisensory Array System for Lossy Capacitive Sensors Over Long Distances

Sandro Carrara, Andromachi Tsirou, Amar Kapic

A robust capacitive multisensory readout system is presented in this article. The system consists of a few thousand lossy capacitive-based sensors that can be modeled as a parallel connection of sensor capacitor and undesirable leakage resistance. The real ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Assessment of the transmission line theory in the modeling of multiconductor underground cable systems for transient analysis using a full-wave FDTD method

Farhad Rachidi-Haeri, Rafael Silva Alipio

In this paper, a rigorous and independent validation of two different approaches for calculating the ground-return impedance and admittance of multiconductor underground cable systems using the transmission line theory is carried out. Furthermore, analyses ...

Elsevier2023

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Design of DEMO PF Coils Based on Cable-in-Conduit Conductor

Pierluigi Bruzzone, Kamil Sedlák, Mithlesh Kumar

The poloidal field (PF) coils are designed based on the requirements defined by the EUROfusion 2015 DEMO baseline. The conductors are forced flow, NbTi cable-in-conduit. The design addresses the dimensioning of the winding pack, the electromagnetic field c ...

2019

Transport à câble aérien en milieu urbain: pertinence et pratique

Fernando Anisio De Oliveira Simas

The intense urbanization of cities has left few options when it comes to insert large mobility infrastructure they need to move their inhabitants. A surface rail network, a dedicated roadway bus line or any other mobility infrastructure such as a tramway a ...

EPFL2019

HTS high current cable for fusion application

Nikolay Bykovskiy

State-of-the-art magnets of fusion devices, which are based on low temperature superconductors (LTS), have almost reached their technological limits in terms of generated magnetic fields. Further progress can be made using novel high temperature supercondu ...

EPFL2017

Design, Manufacture, and Test of an 80 kA-Class Nb3Sn Cable-In-Conduit Conductor With Rectangular Geometry and Distributed Pressure Relief Channels

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Rainer Wesche

Within the frame of the R& D activities carried out in Europe for the toroidal field coils of the nuclear fusion device DEMO, a fundamental milestone was considered to be the demonstration of Nb3Sn cable-in-conduit conductors (CICC) performance in the dema ...

IEEE Institute of Electrical and Electronics Engineers2017

Test of the MF-CICC Conductor Designed for the 12-T Outsert Coil of the HFML 45-T Hybrid Magnet

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov

A 45-T hybrid magnet is being built at the High Field Magnet Laboratory of the Radboud University in Nijmegen, The Netherlands. The hybrid magnet consists of a 12-T cable-in- conduit-conductor (CICC) Nb 3Sn superconducting outsert and a 33-T resistive inse ...

IEEE Institute of Electrical and Electronics Engineers2016