Concept

Pressure solution

Publications associées (18)

Investigation of the effect of mineral dissolution on the geomechanical behaviour of geomaterials

Geotechnical engineering scenarios engaged in internal erosion or mineral dissolution were found worldwide, from CO2 sequestration projects to internal erosion of earth dams. Materials subjected to loss of solid phase from their internal fabric vary from s ...

EPFL2022

Microstructural developments of limestone calcined clay cement (LC3) pastes after long-term (3 years) hydration

Karen Scrivener, Franco Alberto Zunino Sommariva

LC3 is one of the most promising alternatives for a high-performance blended cement with a significantly lower clinker content and with potential for worldwide adoption. For this reason, understanding its long-term performance is relevant to ensure service ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Understanding of the factors slowing down metakaolin reaction in limestone calcined clay cement (LC3) at late ages

Karen Scrivener, Paul Bowen, Yosra Briki, Mohsen Ben Haha, François Henri Avet

Factors which could explain the slowing down of the metakaolin reaction in LC3 blends are investigated. Portlandite availability and the presence of aluminium ions in the pore solution are shown not to be limiting factors. Hydrates can only precipitate in ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Aggregate dissolution in different pore solutions

Mahsa Bagheri

The occurrence of cracking due to alkali silica reaction (ASR) affects the service life of concrete structures. The dissolution of silica-containing minerals within aggregates causes the formation of ASR products, which fill macroscopic cracks and cause th ...

EPFL2021

Maximizing the use of supplementary cementitious materials (SCMs) in blended cements

Yosra Briki

Partial replacement of clinker with supplementary cementitious materials (SCMs) is an effective approach to reduce CO2 emissions related to cement production. However, there is a maximum substitution level with SCMs beyond which strength decreases. The und ...

EPFL2020

Quantification methods for chloride binding in Portland cement and limestone systems

Karen Scrivener, Wei Sun, Fabien Jacques Michel Georget, Hamed Maraghechi, William Wilson, Shiyu Sui

This paper presents a comparison of methods to quantify the chloride binding capacity for cementitious materials composed of Ordinary Portland Cement (OPC) and Limestone (LS, 0 to 55% replacement). Physical and chemical chloride bindings were investigated ...

PERGAMON-ELSEVIER SCIENCE LTD2019

Anisotropic Volumetric Response of Shales upon Suction Changes

Lyesse Laloui, Alessio Ferrari, Alberto Minardi

Anisotropic fabric and volumetric response to suction changes represent two main features of shales, which are involved in several engineering applications. However, a comprehensive understanding of the interaction between these two aspects is still missin ...

2016

The pore solution of blended cements: a review

Barbara Lothenbach, Ruben Anton Snellings

This paper is the work of working group 3 of the RILEM Technical Committee on Hydration and Microstructure of Concrete with SCM (TC 238-SCM). The pore solution is an essential but often overlooked part of hydrated cements. The composition of the cement por ...

Springer2016

A hydromechanical approach to assess CO2 injection-induced surface uplift and caprock deflection

Lyesse Laloui, Chao Li

This study focuses on the derivation of a semi-analytical approach for the evaluation of surface uplift and caprock deflection induced by underground injection of CO2. The adopted methodology includes the development of a mathematical model that incorporat ...

2015

Coupled Approach to Assess Caprock Deformation Caused by CO2 Injection

Lyesse Laloui, Chao Li

This study focuses on a specific problem related to the caprock deformation induced by the injection of CO2 at depth. The adopted methodology includes the development of a mathematical model that incorporates the deformable behaviour of storage media and t ...

2014

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search