Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The paper describes processing and dielectric properties of 0.65Pb(Mn1/3Nb2/3)O-3-0.35PbTiO(3) films deposited on alumina and silicon substrates by screen-printing. Ink development and problems associated with adhesion of electrodes to substrate are discus ...
We develop a theory for investigating atomic-scale dielectric permittivity profiles across interfaces between insulators. A local susceptibility chi(x;omega) is introduced to describe variations of the dielectric response over length scales of the order of ...
Spark Plasma Sintering (SPS) has been successfully applied in the sintering of nanocrystalline BaTiO3 and γ-Al2O3 in order to reach fully dense nanostructured ceramics at moderate pressure and temperature. BaTiO3 compacts with densities exceeding 97% and g ...
We have built a model organic field-effect transistor that is basically composed of a single layer of pentacene crystal in interaction with an oxide surface. Drain and source contacts are ohmic so that the pentacene layer can carry a current density as hig ...
Deutsche Physikalische Gesellschaft & IOP Publishing Ltd2005
Different ODS EUROFER steels reinforced with Y2O3 and MgAl2O4 were elaborated by mechanical milling and hot isostatic pressing. Good compromise between strength and ductility could be obtained but the impact properties remain low (especially for the Y 2O3 ...
Crack patterns of 100-nm-thick silicon oxide coating on polypropylene film subjected to equibiaxial stress loading are studied experimentally. The loading is achieved by means of a bulging cell mounted under an optical microscope with stepwise pressurizati ...
This paper describes new polymer/ceramic photosensitive resins that can be used in the microstereolithography process for manufacturing complex 3D components in composite material. These new resins contain high loads (up to 80 wt.%) of alumina nanoparticle ...
Young's modulus, hardness and fracture toughness of highly ordered nanoporous alumina (PAA) were measured by nanoindentation and Vickers microindentation. A finite element model that accounts for the anisotropy and the pores was developed to extract the Yo ...
An optically-active multi-layer dielectric structure comprises an optically active zone between two mirrors forming a Fabry-Perot microcavity. The optically active zone comprises an optically active material of wavelength lambda centred in a layer of high ...
Metal matrix composites are known for their excellent specific mechanical properties. Nevertheless, because of the thermal expansion mismatch between the matrix and the reinforcements, thermal stresses arise at the interfaces of such materials. In order to ...
