The Transbay Tube is an underwater rail tunnel that carries Bay Area Rapid Transit's four transbay lines under San Francisco Bay between the cities of San Francisco and Oakland in California. The tube is long, and attaches to twin bored tunnels. The section of rail between the nearest stations (one of which is underground) totals in length. The tube has a maximum depth of below sea level.
Built using the immersed tube technique, the Transbay tube was constructed on land in 57 sections, transported to the site, and then submerged and fastened to the bottom – primarily by packing its sides with sand and gravel.
Opened in 1974, the tunnel was the final segment of the original BART system to open. All BART lines except the Berryessa-Richmond line operate through the Transbay Tube, making it one of the busiest sections of the system in terms of passenger and train traffic. During peak commute times, over 28,000 passengers per hour travel through the tunnel with headways as short as 2.5 minutes. BART trains can reach their highest speeds in the tube, up to , although trains typically operate at unless trying to recover from a delay.
The idea of an underwater rail tunnel traversing San Francisco Bay was suggested by the San Francisco eccentric Emperor Norton in a proclamation that he issued on May 12, 1872. Emperor Norton issued a second proclamation on September 17, 1872, threatening to arrest the city leaders of Oakland and San Francisco for neglecting his earlier proclamation.
Official consideration to the idea was first given in October 1920 by Major General George Washington Goethals, the builder of the Panama Canal. The alignment of Goethals's proposed tube is almost exactly the same as today's Transbay Tube, and called for building on bay mud, which anticipated some of the seismic design aspects of the finished Transbay Tube. Goethals's proposal was estimated to cost up to . A competing bridge-and-tunnel proposal was advanced in July 1921 by J.