Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?
Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur Graph Search.
Concept
Hydramatic
Résumé
Hydramatic (also known as Hydra-Matic) is an automatic transmission developed by both General Motors' Cadillac and Oldsmobile divisions. Introduced in 1939 for the 1940 model year vehicles, the Hydramatic was the first mass-produced fully-automatic transmission developed for passenger automobile use.
During the 1930s, automakers sought to reduce or eliminate the need to shift gears. At the time, synchronized gear shifting was still a novelty (and confined to higher gears in most cases), and shifting a manual gearbox required more effort than most drivers cared to exert. The exception here was Cadillac's break-through synchromesh fully synchronized manual transmission, designed by Cadillac engineer Earl A. Thompson and introduced in the autumn of 1928.
Cadillac, under Thompson, began working on a 'shiftless' transmission in 1932, and a new department within Cadillac Engineering was created, headed by Thompson and including engineers Ernest Seaholm, Ed Cole, Owen Nacker, and Oliver Kelley. During 1934, the Cadillac transmission group had developed a step-ratio gearbox that would shift automatically under full torque. This same group of engineers was then moved into the General Motors Research Laboratory, building pilot transmission units during 1935-36 which were then handed to Oldsmobile for testing.
The Automatic Safety Transmission (AST) was a tangent outgrowth of this work. The AST was a semi-automatic transmission using planetary gears and conventional friction clutch, requiring the driver to use the clutch to shift into or out of gear, but not between the two forward gears. Oldsmobile offered the AST from 1937-1939, while Buick offered it only in 1938.
The HydraMatic was designed to combine the hydraulic operation of a planetary gearbox (allowing much shifting to be automated) with a fluid coupling instead of a friction clutch, eliminating the need for de-clutching. The transmission would have four forward speeds (3.82:1, 2.63:1, 1.45:1, and 1.
Source officielle
À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.