Publications associées à Câble électrique

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Federica Demattè, Chiara Frittitta

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Pyroresistive response of percolating conductive polymer composites

Claudio Grimaldi

The pyroresistive response of conductive polymer composites (CPCs) has attracted much interest because of its potential applications in many electronic devices requiring a significant responsiveness to changes in external physical parameters such as temper ...

Amer Physical Soc2024

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Kamil Sedlák

Following the conceptual design, the engineering design of the dc magnet and cable-in-conduit conductor (CICC) for the Super-X test facility has been done in 2021. Totally three types of conductors with different structures were designed for the three pair ...

IEEE Institute of Electrical and Electronics Engineers2023

Assessment of the transmission line theory in the modeling of multiconductor underground cable systems for transient analysis using a full-wave FDTD method

Farhad Rachidi-Haeri, Rafael Silva Alipio

In this paper, a rigorous and independent validation of two different approaches for calculating the ground-return impedance and admittance of multiconductor underground cable systems using the transmission line theory is carried out. Furthermore, analyses ...

Elsevier2023

Small-argument analytical expressions for the calculation of the ground-return impedance and admittance of underground cables

Rafael Silva Alipio

This paper proposes small-argument approximations for two closed-form equations that were recently derived for the calculation of the ground-return impedance and admittance of underground cables. The proposed expressions are shown to be accurate up to 1 MH ...

Elsevier2023

Assessment of the Feasibility of Applying the Electromagnetic Time Reversal Theory to Locate Defects in Grounding Electrodes

Farhad Rachidi-Haeri, Marcos Rubinstein, Hamidreza Karami, Rafael Silva Alipio

In recent years, the electromagnetic time reversal (EMTR) theory has been successfully applied for locating various sources of disturbances, such as short-circuit faults, in power systems. In this paper, a theoretical analysis of the feasibility of applyin ...

2023

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Nikolay Bykovskiy, Roberto Guarino

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

Interaction of lightning-generated electromagnetic fields with overhead and underground cables

Farhad Rachidi-Haeri, Marcos Rubinstein, Carlo Alberto Nucci

In this chapter, we discussed the TL theory and its application to the problem of lightning electromagnetic field coupling to transmission lines. After a short discussion on the underlying assumptions of the TL theory, we described seemingly different but ...

IET2022

Inductive Power Transfer System for Auxiliary Power Supply in Medium Voltage Converters

Drazen Dujic, Chengmin Li, Xiaotong Du

Inductive power transfer technology is an attractive solution for medium voltage applications by eliminating the need for high voltage cables or wired connections in general. This paper introduces an inductive power transfer system which has multiple indep ...

2022