Publications associées à Gilet pare-balles

Electrodeposition of polyaniline on reduced graphene oxide/cotton yarn with tunable electrochemical performance for flexible textile supercapacitors

Graphene/cotton fibers show significant promise in wearable energy storage due to their low cost, porous structure, and exceptional integration ability into wearable systems. However, the eco-unfriendly reductants and standalone electric double-layer capac ...

Elsevier Sci Ltd2024

Transverse cracking in the bulk and at the free edge of thin-ply composites: experiments and multiscale modelling

John Botsis, Robin Amacher, Joël Cugnoni, Sébastien Kohler

Thin-ply composites were shown to exhibit significantly delayed transverse cracking, but the linear onset of damage scaling with ply thickness reported by Amacher et al. (2014) did not correspond to the established LEFM based in situ strength model. This s ...

2019

Direct and catalyst-free growth of vertically-stacked graphene-based structures for enhanced drug sensing

Giovanni De Micheli, Sandro Carrara, Nima Aliakbarinodehi

In this work, a complete study is carried out for the optimised, direct and catalyst-free growth of vertically-stacked graphene-based structures targeting at improved performance drug monitoring. The nanostructures, ultimately forming a honeycomb network o ...

IEEE2019

Dark Energy Spectroscopic Instrument (DESI) Fiber Positioner Production

Jean-Paul Richard Kneib

The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 sq deg will be measured during ...

SPIE-INT SOC OPTICAL ENGINEERING2018

On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding

Jean-Marie Drezet

Aluminum alloy AA6061 was welded to dual-phase steel 980 (DP980) by the friction melt bonding (FMB) process. Hot tears have been suppressed by controlling the thermomechanical cycle. In particular, the welding speed and the thermal conductivity of the back ...

2018

Permeability of textile fabrics with spherical inclusions

Véronique Michaud, Baris Çaglar

We investigated the effect of rigid spherical inclusions such as microcapsules and fillers on the permeability of fabrics by using glass beads as model inclusions. Beads with a range of diameters (40-800 mu m) and volume fractions (2.5-10%) were sieved bet ...

Elsevier2017

Synthesis of bone-like structured foams

Sandrine Gerber, Françoise Borcard

Here we present a processing route to produce multi-structured ceramic foams based on the combination of particle-stabilized foams with polymeric sponges to produce positive and negative templating structures. Polyester sponges are infiltrated with freshly ...

Elsevier Sci Ltd2013

The Graphene-Gold Interface and Its Implications for Nanoelectronics

Klaus Kern, Marko Burghard, Ravi Shankar Sundaram

We combine optical microspectroscopy and electronic measurements to study how gold deposition affects the physical properties of graphene. We find that the electronic structure, the electron-phonon coupling, and the doping level in gold-plated graphene are ...

American Chemical Society (ACS)2011

Impact Load Measurements in an Erosive Cavitating Flow

Ayat Karimi, Jean-Pierre Franc

Impact load measurements were carried out in a high-speed cavitation loop by means of a conventional pressure sensor flush-mounted in the region of closure of the cavity where maximum damage was observed. The sensor was dynamically calibrated by the ball d ...

2011

Fabrication of high-aspect-ratio Fresnel zone plates by e-beam lithography and electroplating

Giorgio Margaritondo

The fabrication of gold Fresnel zone plates, by a combination of e-beam lithography and electrodeposition, with a 30 nm outermost zone width and a 450 nm-thick structure is described. The e-beam lithography process was implemented with a careful evaluation ...

International Union of Crystallography2008