Publications associées à Shielded cable

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Federica Demattè, Chiara Frittitta

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Assessment of the transmission line theory in the modeling of multiconductor underground cable systems for transient analysis using a full-wave FDTD method

Farhad Rachidi-Haeri, Rafael Silva Alipio

In this paper, a rigorous and independent validation of two different approaches for calculating the ground-return impedance and admittance of multiconductor underground cable systems using the transmission line theory is carried out. Furthermore, analyses ...

Elsevier2023

A Method for the Improvement of the Stability in FDTD-Based Numerical Codes Evaluating Lightning-Induced Voltage

Farhad Rachidi-Haeri

Dealing with realistic networks, the solution of lightning electromagnetic field coupling to transmission lines is generally obtained through a Finite-Difference Time-Domain (FDTD) algorithm interfaced with an electromagnetic simulator. As well known, the ...

2021

Design Study of a 50-kA React-and-Wind Bi-2212 Cable for Fusion Magnet

Davide Uglietti

In the last few years, the current density of Bi-2212 wires has been greatly improved by filament densify technologies. One further step toward applications in fusion magnets is to design a high current cable, which must overcome the drawbacks of Bi-2212 w ...

IEEE Institute of Electrical and Electronics Engineers2020

Locating lightning strikes and flashovers along overhead power transmission lines using electromagnetic time reversal

Mario Paolone, Gianluca Antonini, Reza Razzaghi, Keyhan Sheshyekani, Marco Scatena

The paper presents a method to identify the location of direct lightning strikes to overhead transmission lines and potential subsequent flashover(s). The method is based on the electromagnetic time reversal theory and relies on the use of a single measure ...

Elsevier2018

A dynamic-relaxation formulation for analysis of cable structures with sliding-induced friction

Ian Smith, Nizar Bel Hadj Ali, Ann Christine Sychterz

In many cable structures, special types of joints are designed to allow cables to slide freely along the joints. Thus, a number of discrete cable elements are substituted by a single continuous cable that slides over multiple nodes. Continuous cables are e ...

Elsevier2017

A wire shaped coaxial photovoltaic solar cell

Michael Graetzel, Mohammad Khaja Nazeeruddin, Carlos Perez, Mohammad Ibrahim Dar

A wire shaped coaxial photovoltaic solar cell comprising: a conductive core wire shaped support (401), a nanostructured semiconductor scaffold layer (402), one or more successive perovskite layers (403), an optionally provided hole transporting material la ...

2017

Experimental Characterization of the Response of an Electrical and Communication Raceway to IEMI

Farhad Rachidi-Haeri, Marcos Rubinstein, Nicolas Mora Parra

This paper reports the results of two experimental campaigns aimed at studying the high-frequency response of a raceway containing low voltage power, telephone, and Ethernet cables, to external electromagnetic field illumination. The raceway was tested aga ...

Institute of Electrical and Electronics Engineers2016

Low EMI signaling for parallel conductor interfaces

Mohammad Amin Shokrollahi, Nicolae Chiurtu

Methods are disclosed for creation of vector signaling codes having reduced or minimized electromagnetic emissions when transmitted over multiple conductor communications media such as microstrip channels. Particular code formulation constraints are shown ...

2016