Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
We demonstrate experimentally that a part-per-million addition of Sn solutes in Al-Mg-Si alloys can inhibit natural aging and enhance artificial aging. The mechanism controlling the aging is argued to be vacancy diffusion, with solutes trapping vacancies a ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
The influence of microchemistry on the softening behaviour of two cold-rolled Al-Mn-Fe-Si alloys with different initial amounts of Mn (0.4 and 1.0. wt%) is studied. In addition to their as-cast conditions, the supersaturated Al-Mn-Fe-Si alloys were appropr ...
Plane-strain tensile loading numerical simulations of dynamic crack propagation in silicon nitride microstructures are conducted. The strength and toughness are evaluated as a function of strain rate and microstructural parameters, including grain size and ...
We explore the influence of the metal microstructure on the compressive flow stress of replicated microcellular 400-mu m pore size Al-4.5 wt%Cu solidified at two different solidification cooling rates, in the as-cast and T6 conditions. It is found that the ...
In the framework of a collaboration, CRPP (Centre de Recherches en Physique des Plasmas) and WEKA AG have developed high-temperature superconductor (HTS) current leads for currents in the range of 3 to 30 kA, which are suitable for industrial fabrication. ...
A small coated conductor coil (central field 1 T at 200 A) was constructed and tested in order to evaluate the benefit and the possible disadvantages of non insulated, double pancake construction, in particular regarding quench protection. The insert coil ...
Investigation of the microstructural evolution of Al-Mn-Fe-Si alloys during annealing after cold rolling has been carried out. The effect of microchemistry state in terms of Mn in solid solution, constituents, size and volume fraction of dispersoids, intro ...
Fiber Bragg gratings fabricated in pristine SMF-28e fibers using pulsed ArF-excimer and cw 244-nm Ar+ laser were annealed using tempering rates from 0.0038 to 0.25 K/s. Demarcation energy mapping allowed for the determination of the frequency factors and t ...
A large portion of reinforced concrete (RC) bridges in the western world were built in the second half of the last century. RC bridge deck slabs are nowadays often subjected to increased traffic loading and volume than originally designed for and thus, ste ...