Publications associées à Câblage structuré

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Following the conceptual design, the engineering design of the dc magnet and cable-in-conduit conductor (CICC) for the Super-X test facility has been done in 2021. Totally three types of conductors with different structures were designed for the three pair ...

IEEE Institute of Electrical and Electronics Engineers2023

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Nikolay Bykovskiy, Roberto Guarino

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

A dynamic-relaxation formulation for analysis of cable structures with sliding-induced friction

Ian Smith, Nizar Bel Hadj Ali, Ann Christine Sychterz

In many cable structures, special types of joints are designed to allow cables to slide freely along the joints. Thus, a number of discrete cable elements are substituted by a single continuous cable that slides over multiple nodes. Continuous cables are e ...

Elsevier2017

Experimental Characterization of the Response of an Electrical and Communication Raceway to IEMI

Farhad Rachidi-Haeri, Marcos Rubinstein, Nicolas Mora Parra

This paper reports the results of two experimental campaigns aimed at studying the high-frequency response of a raceway containing low voltage power, telephone, and Ethernet cables, to external electromagnetic field illumination. The raceway was tested aga ...

Institute of Electrical and Electronics Engineers2016

Overview of Performance Test of Korean CICCs for ITER TF Magnet

Pierluigi Bruzzone, Boris Stepanov

The Korean Domestic Agency (KODA) for the International Thermonuclear Experimental Reactor (ITER) project has taken the responsibility of the procurement of cable-in-conduit conductors for the ITER toroidal field magnet. While procuring 27 conductor unit l ...

IEEE Institute of Electrical and Electronics Engineers2016

Test of the MF-CICC Conductor Designed for the 12-T Outsert Coil of the HFML 45-T Hybrid Magnet

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov

A 45-T hybrid magnet is being built at the High Field Magnet Laboratory of the Radboud University in Nijmegen, The Netherlands. The hybrid magnet consists of a 12-T cable-in- conduit-conductor (CICC) Nb 3Sn superconducting outsert and a 33-T resistive inse ...

IEEE Institute of Electrical and Electronics Engineers2016

Test Results of RF ITER TF Conductors in the SULTAN Test Facility

Pierluigi Bruzzone, Boris Stepanov

The cable-in-conduit-conductors (CICC) for the ITER Toroidal Field (TF) Coils are tested in the Sultan test facility in order to estimate their AC and DC performances under operating conditions. The tests are carried out on different stages of conductor pr ...

IEEE Institute of Electrical and Electronics Engineers2014

Experimental and Analytical Approaches on JT-60SA TF Strand and TF Conductor Quality Control During Qualification and Production Manufacture Stages

Pierluigi Bruzzone, Boris Stepanov

In the framework of the JT-60SA project, aiming at upgrading the present JT-60U tokamak, Europe as part of its in-kind contribution within the Broader Approach agreement, will provide the full Toroidal Field (TF) magnet system. For this purpose, Fusion for ...

IEEE Institute of Electrical and Electronics Engineers2013

Test Results of Three Poloidal Field Superconducting Samples in SULTAN

Pierluigi Bruzzone, Boris Stepanov, Rainer Wesche

Superconductors for the ITER Poloidal Field Coils are large cable-in-conduit conductors (CICC) made of NbTi strands encased in a round-in-square stainless steel jacket. Three prototype conductor sections for poloidal field coils PF1/6, PF2/3/4 and PF5 have ...

IEEE-Inst Electrical Electronics Engineers Inc2012