Publications associées à Histoire du gaz manufacturé

Swelling and shrinkage of partially saturated gas shales: from laboratory tests to an effective stress framework

Gas shale swelling during hydraulic stimulation is one of the major challenges in unconventional gas development. It is hypothesized that the large volumetric strain upon water imbibition is a consequence of dramatic changes in capillary pressure and disjo ...

EPFL2022

Tuning the tribological performance of plasma-treated hybrid layers of PEEK-GO-DLC

Roberto Guarino

Graphene and graphene oxide (GO)-based coatings are of great interest due to their mechanical, electrical and/or thermal performance that add functionalities to materials employed in many industrial and biomedical appli-cations. Hybrid diamond-like carbon ...

2022

Experimental and modeling-based analysis of reaction pathways on catalysts for natural gas engines under periodic lean/rich oscillations

Oliver Kröcher, Davide Ferri, Moyu Wang

Methane (CH4) has the prospective of becoming one of the major energy carriers for heavy-duty mobility, but its catalytic abatement remains a challenge. CH4 abatement reaction pathways were analyzed using targeted periodic lean/rich oscillations, which res ...

ELSEVIER SCIENCE SA2022

Insights into the molecular composition of semi-volatile aerosols in the summertime central Arctic Ocean using FIGAERO-CIMS

Julia Schmale, Andrea Baccarini

The remote central Arctic during summertime has a pristine atmosphere with very low aerosol particle concentrations. As the region becomes increasingly ice-free during summer, enhanced oceanatmosphere fluxes of aerosol particles and precursor gases may the ...

2021

Towards understanding the characteristics of new particle formation in the Eastern Mediterranean

Lubna Dada

To quantify the contribution of new particle formation (NPF) to ultrafine particle number and cloud condensation nuclei (CCN) budgets, one has to understand the mechanisms that govern NPF in different environments and its temporal extent. Here, we study NP ...

Copernicus Publications2021

HCN production from formaldehyde during the selective catalytic reduction of NOx with NH3 over V2O5/WO3-TiO2

Oliver Kröcher, Davide Ferri, Rob Jeremiah G. Nuguid

Raw exhaust gases may contain notable levels of formaldehyde that can negatively impact the efficiency of after -treatment systems. In the selective catalytic reduction (SCR) of NOx over V2O5/WO3-TiO2, formaldehyde was found to react with NH3 to produce HC ...

ELSEVIER2021

A new Euler-Lagrangian cavitation model for tip-vortex cavitation with the effect of non-condensable gas

Mohamed Farhat, Huaiyu Cheng

Numerical simulation of tip vortex cavitation (TVC) remains a challenging task in a variety of applica-tions, such as axial turbines and pumps as well as marine propellers. Although it is well known that TVC is highly sensitive to gas content, be it dissol ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Disruption mitigation efficiency and scaling with thermal energy fraction on ASDEX Upgrade

Basil Duval, Umar Sheikh, Gergely Papp

Disruption mitigation remains a critical and unresolved issue for ITER. Measurement uncertainties preventing quantification of a system's efficacy remains a significant hurdle in producing and validating a viable disruption mitigation system. This study ad ...

IOP Publishing Ltd2020

Hyphenated Analytical Techniques for Studying the Speciation and Fate of Contaminants and Nanoparticles in Waste Treatment and Bioenergy Processes

Debora Foppiano

The widespread use of nanoparticles (NPs) and other potentially ecotoxic chemical compounds to enhance the quality of consumer products has raised concern about their fate in the environment. Indeed, those products have to be ultimately disposed of and alo ...

EPFL2019

Self-consistent pedestal prediction for JET-ILW in preparation of the DT campaign

Olivier Sauter, Ambrogio Fasoli, Yiming Li, Basil Duval, Jonathan Graves, Duccio Testa, Patrick Blanchard, Federico Alberto Alfredo Felici, Alessandro Pau, Cristian Sommariva

The self-consistent core-pedestal prediction model of a combination of EPED1 type pedestal prediction and a simple stiff core transport model is able to predict Type I ELMy (edge localized mode) pedestals of a large JET-ILW (ITER-like wall) database at the ...

2019