Concept

Porcelaine

Publications associées (35)

The Effect of Limestone on the Performance of Ternary Blended Cement LC3: Limestone, Calcined Clays and Cement

Karen Scrivener, Franco Alberto Zunino Sommariva, Aurélie Rosine Favier, Ioannis Katrantzis

This project explores the influence of different particle size distributions of limestone on the workability and early-age strength development of LC3 materials. To quantify, and subsequently optimize, the packing, the modified Andreasen and Andersen model ...

Springer2018

Investigation of the grade of calcined clays used as clinker substitute in Limestone Calcined Clay Cement (LC3)

François Henri Avet

The combination of calcined kaolinitic clays and limestone in Limestone Calcined Clay Cement (LC3) is a promising approach to reduce the cost and the CO2 emissions of cement production by reducing the clinker content of cement. This thesis investigates the ...

EPFL2017

Pozzolanic reactivity of low grade kaolinitic clays: Influence of calcination temperature and impact of calcination products on OPC hydration

Karen Scrivener, Adrian Alujas Diaz, Rodrigo Fernandez Lopez

The influence of thermal activation temperature in the pozzolanic reactivity of low grade kaolinitic clay and the impact of calcination products in OPC hydration are assessed in this paper. The raw material, with approximately 40% kaolinite and 40% of 2:1 ...

Elsevier Science Bv2015

Effect of fineness in clinker-calcined clays-limestone cements

Karen Scrivener, Mathieu Antoni, Adrian Alujas Diaz, Leng Maday Vizcaino Andres

This paper looks at the effect of fineness of the different components in a blend containing 55% Portland cement, 30% calcined clay and 15% limestone. The calcined clay originates from a natural deposit in Cuba and contains less than 50% kaolinite. The par ...

Ice Publishing2015

Influence of silica fume on the microstructure of cement pastes: New insights from H-1 NMR relaxometry

Karen Scrivener, Arnaud Charles Albert Muller

H-1 NMR has been used to characterise white Portland cement paste incorporating 10 wt.% of silica fume. Samples were measured sealed throughout the hydration without sample drying. Paste compositions and C-S-H characteristics are calculated based on H-1 NM ...

Pergamon-Elsevier Science Ltd2015

Investigation of cement substitution by blends of calcined clays and limestone

Mathieu Antoni

This thesis investigates the replacement of Portland cement by addition of high amounts of calcined clays and limestone. Such ternary blends can become more ecological and economical binders to answer the worldwide housing shortage. It could be demonstrate ...

EPFL2013

Effects of low-temperature curing on physical behavior of cold-curing epoxy adhesives in bridge construction

Thomas Keller, Anastasios Vassilopoulos, Omar Moussa

The effect of low-temperature curing on the physical characteristics of a commercial cold-curing epoxy adhesive was experimentally and analytically investigated with a view to a potential application in bridge construction in winter. Curing at low temperat ...

Elsevier2012

Cement substitution by a combination of metakaolin and limestone

Karen Scrivener, Mathieu Antoni, John Espen Rossen

This study investigates the coupled substitution of metakaolin and limestone in Portland cement (PC). The mechanical properties were studied in mortars and the microstructural development in pastes by X-ray diffraction, thermogravimetry analysis, mercury i ...

Pergamon-Elsevier Science Ltd2012

Effect of temperature on collapse potential of kaolin clay

Lyesse Laloui, Ali Haghighi

The understanding of the fundamental behaviour of clays subjected to high temperatures is essential when working with clay barriers in nuclear waste storage, drilling of deep offshore wells or using clay liners on landfills. The effect of temperature on th ...

2011

Low-firing thick-film piezoresistive sensors for medical instruments

Peter Ryser, Thomas Maeder, Caroline Jacq

In this work, a low-firing thick-film materials system allowing fabrication of piezoresistive sensors on surgical alloys is presented in detail, with application to a force-sensing surgical instrument. The system comprises a series of individual thick-film ...

Elsevier2011

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search