Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Nuclear magnetic resonance (NMR) is a non-invasive tool for the study of human diseases. In particular, carbon-13 magnetic resonance spectroscopy (13C MRS) is a promising derivative tool for investigating metabolism in vivo, as it allows the non-invasive m ...
Steady operating conditions of an extra-high-voltage power line equipped with controlled shunting reactors are considered. The required control of the reactors is shown that enables the permissible levels of voltage at intermediate points of the power line ...
A major change in the electrical transmission and distribution system is taking place in Europe at the moment. The shift from a centralised energy production to a distributed generation profoundly changes the behaviour of the grid. Environmental or social ...
The power system has been used for communication purposes for many decades, although it was mainly the power utility companies that used low bit rates for control and monitoring purposes. In the last ten years, however, the deregulation of the power and te ...
Atwisted stack of high-temperature superconducting (HTS) tapes soldered into copper profiles was used as a strand in the fabrication of the 60-kA/ 12-T HTS cable prototype at the Center for Research in Plasma Physics (CRPP). Considering the strand in gener ...
The brittleness of the MgB2 wires prevents performing a cable architecture with very small bending radius, similar to NbTi Rutherford cables. Consequently, it is important to reduce the thickness of the superconducting materials in order to increase its be ...
The calculation of AC loss due to the control currents in ITER is a cumbersome task. The reason is that control transients require small field changes (0.1 T or less) at moderate frequency (up to 10 Hz), where effects of partial penetration of the filament ...
In the framework of high luminosity upgrade of Large Hadron Collider at CERN, superconducting links are being developed. MgB2 wire is a candidate conductor for use in high- current cables. Mechanical properties of this material are of key importance for th ...
Heat and charge transport perpendicular to the plan in five Co/Cu stacks are studied using AC temperature gradients in the presence of a DC current. Large peaks in AC voltage response versus applied field are observed. This effect, measured only in reversi ...
The performances of six Nb3Sn conductors for the ITER Toroidal Field coils were tested. Four of them showed similar degradation rates of their current sharing temperatures T-cs over 1,000 electromagnetic cycles. By contrast, two of them showed sharp T-cs d ...
