The ITER Electron Cyclotron Resonance Heating and Current Drive (ECRH&CD) system relies on 1 MW 170 GHz Gyrotrons to provide the mm-wave power needed for plasma heating, current drive, and magneto-hydrodynamic control. The design and modeling of the contro ...
Heat transfer phenomena involving internally heated fluid flows are of particular interest in several industrial applications, in chemical plants as in the nuclear field. This topic is relevant for the development of the Molten Salt Reactors (MSRs) since i ...
This study presents a numerical investigation of the effects of coupled material properties on the caprock stability. A thermo-hydro-mechanical framework is proposed in order to reproduce the physical processes. The results indicate that for a given geomet ...
Energy storage is a central issue in the green economy with half the global end energy usage being heat. Latent heat thermal energy storage (LHTES) provides an energy dense heat storage solution with a well-defined discharge temperature. Utilizing low-cost ...
In this study, thermo-hydro-mechanical coupled simulations are performed to investigate caprock stability under cooling and pressurization during the injection of carbon dioxide. It is shown that failure potential of caprock increases with a higher value o ...
Autogenous shrinkage is the unrestrained volume change of cementitious materials occurring at con-stant temperature without any change in mass. It occurs as a consequence of self-desiccation (de-crease of internal relative humidity) and increasing capillar ...
The diffusive regime of double-diffusive convection generates staircases consisting of thin high-gradient interfaces sandwiched between convectively mixed layers. Simultaneous microstructure measurements of both temperature and conductivity from the stairc ...
The focus of this study is to evaluate the effects of porous media inside the gas flow channel of Proton Exchange Membrane Fuel Cells (PEMFC) on four different output parameters of voltage, power density, pressure drop, and Nusselt number (Nu) considering ...
Controlled melting and solidification in encapsulated phase change materials (PCMs) is of practical interest, for example, in latent heat storage applications. The choice of PCMs and the dynamic heat transfer characteristics during phase change - affecting ...
In the second article of the present two-part paper, upward single-phase heat transfer within a compact plate heat exchanger was investigated experimentally. The experimental setup, the data reduction technique and pressure drop results were presented in P ...
