Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Philippe GilletPhilippe GILLET est entré à lEcole normale supérieure de la rue dUlm (Paris) pour y mener des études en sciences de la Terre. En 1983, il obtient un PhD en géophysique à luniversité de Paris VII et rejoint luniversité de Rennes I comme assistant. En 1988, titulaire dun doctorat dEtat, il devient professeur dans cette même université et la quitte en 1992 pour rejoindre Ecole normale supérieure de Lyon.
La formation des chaînes de montagnes, et des Alpes en particuliers, est lobjet de la première partie de sa carrière scientifique. En parallèle, il développe des techniques expérimentales (cellules à enclumes de diamants)qui permettent de simuler en laboratoire les conditions de pression et de température qui règnent au sein des planètes. Lobjectif de ces expériences est de comprendre de quels matériaux sont constituées les profondeurs inatteignables des planètes du système solaire.
En 1997, il commence à travailler sur la matière extraterrestre. Il participe à la description de météorites venant de Mars, de la Lune ou de planètes aujourdhui disparues et explique comment celles-ci ont été expulsées de leur planète dorigine par des chocs titanesques avant darriver sur Terre. Il a aussi participé au programme STARDUST de la NASA et contribué à lidentification de grains de comète ramenés sur Terre après avoir été capturés au voisinage de la comète Wild-II. Ces grains représentent les premiers minéraux de notre système solaire, formés il y a plus de 4,5 milliards dannées. Il a aussi travaillé sur les sujets suivants :
interactions entre bacteries et minéraux;
amorphisation sous pression;
techniques expérimentales: cellule à enclumes de diamant, spectroscopie Raman,diffraction des RX sur source synchrotron, microscopie électronique.
Philippe Gillet a aussi une activité de management de la science et de lenseignement. Il a ainsi dirigé lInstitut National des Sciences de lUnivers du CNRS (France), présidé le synchrotron français SOLEIL, lAgence Nationale de la Recherche française(2007) et lEcole normale supérieure de Lyon. Avant de rejoindre lEPFL il a été le directeur de cabinet du Ministre français de la Recherche et de lEnseignement Supérieur.
Quelques publications :
Ferroir, T., L. Dubrovinsky, A. El Goresy, A. Simionovici, T. Nakamura, and P. Gillet (2010), Carbon polymorphism in shocked meteorites: Evidence for new natural ultrahard phases, Earth and Planetary Science Letters, 290(1-2), 150-154
Barrat J.A., Bohn M., Gillet Ph., Yamaguchi A. (2009) Evidence for K-rich terranes on Vesta from impact spherules. Meteoritics & Planetary Science, 44, 359374.
Brownlee D, Tsou P, Aleon J, et al. (2006) Comet 81P/Wild 2 under a microscope. Science, 314, 1711-1716.
Beck P., Gillet Ph., El Goresy A., and Mostefaoui S. (2005) Timescales of shock processes in chondrites and Martian meteorites. Nature 435, 1071-1074.
Blase X., Gillet Ph., San Miguel A. and Mélinon P. (2004) Exceptional ideal strength of carbon clathrates. Phys. Rev. Lett. 92, 215505-215509.
Gillet Ph. (2002) Application of vibrational spectroscopy to geology. In Handbook of vibrational spectroscopy, Vol. 4 (ed. J. M. Chalmers and P. R. Griffiths), pp. 1-23. John Wiley & Sons.
Gillet Ph., Chen C., Dubrovinsky L., and El Goresy A. (2000) Natural NaAlSi3O8 -hollandite in the shocked Sixiangkou meteorite. Science 287, 1633-1636.
Yves BellouardDr. Yves Bellouard is Associate Professor in Microengineering at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he heads the Galatea lab and the Richemont Chair in micromanufacturing. He received a BS in Theoretical Physics and a MS in Applied Physics from Université Pierre et Marie Curie in Paris, France in 1994-1995 and a PhD in Microengineering from Ecole Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland in 2000. For his PhD work, he received the Omega Scientific prize (2001) for outstanding contribution in the field of microengineering for his work on Shape Memory Alloys. Before joining EPFL in 2015, he was Associate Professor at Eindhoven University of Technologies (TU/e) in the Netherlands and prior to that, Research Scientist at Rensselaer Polytechnic Institute (RPI) in Troy, New York for about four years where he started working on femtosecond laser processing of glass materials. From 2010 until 2013, Yves Bellouard initiated and coordinated the Femtoprint project, a European research initiative aiming at investigating a table-top printer for microsystems ('3D printing of microsystems'). In 2013, he received a prestigious ERC Starting Grant (Consolidator-2012) from the European Research Council and a JSPS Fellowship from the Japan Society for the Promotion of Science. His current research interests are on new paradigms for system integration at the microscale and in particular laser-based methods to tailor material properties for achieving higher level of integration in microsystems, like for instance integrating optics, mechanics and fluidics in a single monolith. These approaches open new opportunities for direct-write methods of microsystems (3D printing). Personal website
