Publications associées à Thermoplastique

Engineering polymers with improved charge transport properties from bithiophene-containing polyamides

Rosario Scopelliti, John Christopher Plummer, Farzaneh Fadaei Tirani, Holger Frauenrath, Nicolas Candau, Bilal Özen

Polymer semiconductors show unique combinations of mechanical and optoelectronic properties that strongly depend on their microstructure and morphology. Here, we have used a model pi-conjugated bithiophene repeat unit to incorporate optoelectronic function ...

ROYAL SOC CHEMISTRY2020

En route to CO2-containing renewable materials: catalytic synthesis of polycarbonates and non-isocyanate polyhydroxyurethanes derived from cyclic carbonates

Paul Joseph Dyson, Felix Daniel Bobbink, Antoine Philippe Van Muyden

Combining CO2-chemistry with biomass conversion allows renewable polymeric materials including polycarbonates and polyhydroxyurethanes (PHUs) to be generated. The demand for robust materials with modular properties that can be prepared on an industrial sca ...

2019

Influence of Alkoxy Chain Length on the Properties of Two-Dimensionally Expanded Azulene-Core-Based Hole-Transporting Materials for Efficient Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Jiyoun Seo, Toru Nakamura, Mina Jung

A series of two-dimensionally expanded azulenecore- based pi systems have been synthesized with different alkyl chain lengths in the alkoxy moieties connected to the partially oxygen-bridged triarylamine skeletons. The thermal, photophysical, and electroni ...

WILEY-V C H VERLAG GMBH2019

A Sustainable Approach to Produce Stiff, Super-Tough, and Heat-Resistant Poly(lactic acid)-Based Green Materials

Nicolas Candau, Oguzhan Oguz, Mehmet Kerem Citak, Fatma Nalan Cetin

Circumventing inherent embrittlement, poor heat resistance, and melt elasticity of poly(lactic acid) (PLA) without compromising its remarkable stiffness and strength has become a particular challenge in polymer science due to increasing demand for green ma ...

AMER CHEMICAL SOC2019

Nanoscale Selective Passivation of Electrodes Contacting a 2D Semiconductor

Aleksandra Radenovic, Martina Lihter, Michael Graf

2D semiconducting materials have become the central component of various nanoelectronic devices and sensors. For sensors operating in liquid, it is crucial to efficiently block the electron transfer that occurs between the electrodes contacting the 2D mate ...

WILEY-V C H VERLAG GMBH2019

2G/3G Serpentine Shape Inverted-F Antenna for Near Body Application

Anja Skrivervik, Nuno Miguel Faria Pires

In this contribution, we present a miniature antenna placed in a leg bracelet for body worn applications. It operates in both the 820-960 MHz and the 1.7-2.1 GHz bands. The radiating element, based on an inverted-F antenna, occupies a 37 mm × 37 mm area an ...

IEEE2019

Hierarchical porous structure

Dominique Pioletti, Pierre-Etienne Bourban, Matteo Gregorio Modesto Marascio

Cellular thermoplastic structures with hierarchical multi-scale porosity (preferably 1-300 µm micro-porosity to 0.3-10 mm macro-porosity) are produced from an integrated approach of 3D printing, preferably by Fused Deposition Modeling (FDM), and of supercr ...

2018

Morphology and interfacial strength of nonisothermally fusion bonded hard and soft thermoplastics

Pierre-Etienne Bourban, Rajasundar Chandran

Nonisothermally fusion bonded butt joints were prepared by overmolding thermoplastic elastomers (TPEs) onto isotactic polypropylene (iPP) inserts in order to investigate the effect of processing conditions on the bond strength and interfacial microstructur ...

2018

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Thermoplastique

Engineering polymers with improved charge transport properties from bithiophene-containing polyamides

En route to CO2-containing renewable materials: catalytic synthesis of polycarbonates and non-isocyanate polyhydroxyurethanes derived from cyclic carbonates

Influence of Alkoxy Chain Length on the Properties of Two-Dimensionally Expanded Azulene-Core-Based Hole-Transporting Materials for Efficient Perovskite Solar Cells

A Sustainable Approach to Produce Stiff, Super-Tough, and Heat-Resistant Poly(lactic acid)-Based Green Materials

Nanoscale Selective Passivation of Electrodes Contacting a 2D Semiconductor

2G/3G Serpentine Shape Inverted-F Antenna for Near Body Application

Multiscale experimental characterisation and modelling of transverse cracking in thin-ply composites

Hierarchical porous structure

Strategies for faster impregnation in melt thermoplastic resin transfer molding process

Morphology and interfacial strength of nonisothermally fusion bonded hard and soft thermoplastics

Graph Chatbot

Chattez avec Graph Search

Nanoscale Selective Passivation of Electrodes Contacting a 2D Semiconductor

Multiscale experimental characterisation and modelling of transverse cracking in thin-ply composites

A Sustainable Approach to Produce Stiff, Super-Tough, and Heat-Resistant Poly(lactic acid)-Based Green Materials

Engineering polymers with improved charge transport properties from bithiophene-containing polyamides

2G/3G Serpentine Shape Inverted-F Antenna for Near Body Application

En route to CO2-containing renewable materials: catalytic synthesis of polycarbonates and non-isocyanate polyhydroxyurethanes derived from cyclic carbonates

Influence of Alkoxy Chain Length on the Properties of Two-Dimensionally Expanded Azulene-Core-Based Hole-Transporting Materials for Efficient Perovskite Solar Cells

Strategies for faster impregnation in melt thermoplastic resin transfer molding process