Publications associées à Power metal

Atomic doping & coating for Electrocatalysis & Li-ion batteries

Molybdenum atomic-doping on bio-waste derived nitrogen-doped conductive carbon electrocatalyst was synthesized and investigated for the dinitrogen reduction to ammonia in alkaline media. The assessment of the catalytic activity was found to be non-trivial ...

EPFL2022

Development of stencil lithography for stretchable interconnects

Yi-Chiang Sun

The growing needs for human healthcare have driven the development of wearable devices for monitoring the health status of an individual. Polymers represent a promising platform for such devices due to their ability to form an intimate contact between soft ...

EPFL2022

Electron Beam Induced Copper Deposition from Carboxylate Precursors and the Study of Underlying Growth Mechanisms

Luisa Berger

The fabrication of defined and high-quality metal nanostructures is an ongoing topic of research. Direct-write deposition of copper nanostructures is of great value for many fields of research and industrial applications. Focused electron beam induced depo ...

EPFL2020

Cyanide Single-Molecule Magnets Exhibiting Solvent Dependent Reversible "On" and "Off" Exchange Bias Behavior

Jan Gui-Hyon Dreiser

The syntheses, structures, and magnetic properties of four new complex salts, (PPN){Mn-III(salphen)(MeOH)[M-III(CN)(6)]} 7MeOH (Mn2M 7MeOH) (M = Fe, Ru, Os and Co; PPN+ = bis(triphenylphosphoranylidene)ammonium cation; H2salphen = N,N'-bis(salicyliden ...

American Chemical Society2015

Two-Dimensional Metal-Organic Networks as a New Class of Electrocatalysts

Benjamin Wurster

This thesis deals with the electrocatalytic properties of two-dimensional metal organic coordination networks (2D-MOCNs) self-assembled on electrode surfaces and catalytic activity of 2D-MOCNs is demonstrated for the first time. The low-coordinated metal c ...

EPFL2015

Fatigue and cyclic creep of replicated microcellular aluminium

Andreas Mortensen, Frédéric Diologent, Sébastien Philippe Soubielle

The cyclic behaviour of 400 mu m pore size replicated aluminium foam is assessed in tension-tension fatigue with a stress ratio equal to 0.1, keeping the load amplitude constant, for relative density values comprised between 0.175 and 0.220. The number of ...

Elsevier2011

Cu and Pb accumulation by the marine diatom Thalassiosira weissflogii in the presence of humic acids

Metal complexation by dissolved organic matter, as humic acids, is considered to decrease metal bioavailability by lowering the free metal ion concentration. However, dissolved organic matter adsorption on cell surfaces can modify cell membrane properties, ...

2010

Uniaxial deformation of microcellular metals: model systems and simplified analysis

Andreas Mortensen, Frédéric Diologent, Yves Conde, Sébastien Philippe Soubielle, Randoald Müller, Etienne Combaz, Jean-François Despois

Microcellular aluminium can be produced by a process known as replication; this involves the infiltration of a packed bed of NaCl particles which are subsequently leached after metal solidification. The resulting material features a uniform distribution of ...

Springer2009

Micro-, meso- and macrostructures in replicated microcellular aluminium

Yves Conde

This thesis is focused on the properties of microcellular aluminium, produced by replication processing, at the micro, meso and macrostructural level. The replication process is based on the infiltration of a porous sodium chloride (NaCl) perform with molt ...

EPFL2009

Age-Hardening Response of Replicated Microcellular Al-4.5%Cu

Andreas Mortensen, Yves Conde

We study the response to age hardening of Al-4.5%Cu replicated foams with 75 and 400 pm cell sizes and with varying relative densities. The 400 mu m cell size foams have a similar behavior to the bulk alloy, whereas the 75 pm cell size foams with relative ...

Destech Publications, Inc, 439 Duke Street, Lancaster, Pa 17602-4967 Usa2008