Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This study focuses on the removal of 32 selected micropollutants (pharmaceuticals, corrosion inhibitors and biocides/pesticides) found in an effluent coming from a municipal wastewater treatment plant (MWTP) based on activated sludge. Dissolved organic mat ...
The spreading of deicing salt on roads during winter and the consequent migration of chloride ions within concrete exposes structures reinforcement to corrosion. Reinforcement corrosion is problematic because it reduces the structure's load carrying capaci ...
The semiconducting materials used for photoelectrochemical (PEC) water splitting must withstand the corrosive nature of the aqueous electrolyte over long time scales in order to be a viable option for large scale solar energy conversion. Here we demonstrat ...
A good biocompatibility, excellent mechanical properties and high corrosion resistance characterize CoCrMo alloys. Therefore they are widely used for artificial joints in biomedical implants. However, the degradation of the implants during service life lea ...
During their lifetime, glass panels are repetitively exposed to thermal stresses. These thermal stresses result from temperature differences within the panel, which most notably cause the edges of the panels to be stressed in tension. When these thermal st ...
Tribocorrosion of Al-Si-Cu-Mg alloys was investigated in 0.05 M NaCl and 0.1 M NaNO3 solutions under severe sliding and controlled electrochemical conditions. A simple galvanic coupling model was developed to analyze and quantitatively predict the evolutio ...
In modern buildings, glass is increasingly used as a load-carrying material in structural components, such as glass beams. For glass beams especially the edge strength of glass is important. However, the strength of glass is not a material constant but dep ...
Valuable insights into the wear-corrosion behavior of metals, as well as into the tribocorrosion field through the development of simulation models of tribocorrosion experiments, can contribute in rationalizing wear-accelerated experiments and their open c ...
The interior surfaces of three-dimensional open cell foams were coated by a combination of dip coating and spin coating. Glycerol/water solutions were used as model Newtonian liquids, and the coating processes were studied on open cell carbon foams with 10 ...
Knee and hip joint replacement implants involve a sliding contact between the femoral component and the tibial or acetabular component immersed in body fluids, thus making the metallic parts susceptible to tribocorrosion. Micro-motions occur at points of f ...