Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In order to meet the requirements of fusion power reactors and nuclear waste treatment, a concept of fission-fusion neutron source is proposed, which consists of a LiD assembly located in the heavy water region of the China Advanced Research Reactor. This ...
ICON is the new cold neutron imaging facility at the neutron spallation source SINQ. The ICON facility is placed at beam-line S52 with direct view to the cold liquid D-2 moderator. The beam-line includes a 4.4 m long collimation section followed by a 1 I m ...
Megawatt pilot target experiment (MEGAPIE) is an international project aimed at demonstrating the feasibility of a liquid lead–bismuth target for spallation facilities at a maximum beam power level of 1 MW. The thermal-hydraulics data measured during the M ...
Two zirconium alloys (Zr-2.5%Nb) - one oxidized in a pressurized water reactor, the other oxidized in autoclave and used as reference - are analyzed by combining synchrotron-based scanning transmission and fluorescence X-ray microscopy and micro-X-ray abso ...
In this paper, an RF-driven pedestal-free cavity-less 40 GHz pulse source for generation of high-speed optical time-division multiplexing signal is presented. The pulse source is based on pulse compression by means of self-phase modulation in combination w ...
Institute of Electrical and Electronics Engineers2009
The challenge of developing the conceptual design of the ECH Upper Launcher system for MHD control in the ITER plasmas has been tackled by team of European Associations together with the European Domestic Agency ("F4E"). The launcher system has to meet the ...
Ferritic/martensitic (FM) steels, F82H and Optimax-A, were irradiated up to 11.3 dpa/1175 appm He in Target-3 of the Swiss Spallation Neutron Source (SINQ). To investigate helium-induced hardening effect, micro-hardness and microstructure of the irradiated ...
Oxide dispersion strengthened (ODS) steels are candidate materials for advanced electric energy and heat generation plants (nuclear, fossil). Understanding the degradation of mechanical properties of these alloys as a result of service exposure is necessar ...
The ITER high-frequency (HF) magnetic sensor is currently intended to be a conventional, Mirnov-type, pickup coil, designed to provide measurements of magnetic instabilities with magnitude as low as |dB|~10e-4G at the position of the sensors and up to freq ...
Irradiation-induced hardening and loss of ductility of ferritic/martensitic materials envisaged for future fusion reactor is still difficult to understand. In particular, helium (He), produced by transmutation by the fusion neutrons of 14 MeV, is known to ...