Christian Ludwig2005 - today: Adjunct Professor at EPFL in the field of Solid Waste Treatment and head of the Chemical Processes and Materials research group (CPM) at Paul Scherrer Institute (PSI). Joint EPFL-PSI Professorship on Solid Waste Treatment. 2000 - today: Head, Group of Chemical Processes and Materials (CPM) at Paul Scherrer Institut (PSI). In 2009 the LEM unit was closed and the CPM group is now affiliated to the Bioenergy and Catalysis Laboratory (LBK) of the Energy and Environment Research Division (ENE). Since June 2002 permanent position ("tenure"). 1997 - 1999: Senior Scientist. Paul Scherrer Institut (PSI), General Energy Research Department, Element Cycles Section. 1995 - 1997: Research Fellow. Swiss Federal Institute for Environmental Science and Technology (EAWAG), Department of Resource and Waste Management. 1993 - 1995: Post-doc Fellow. University of California Davis, Department of Land, Air, and Water Resources (LAWR). 1990 - 1993: PhD Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry. 1989 - 1990: Master Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry.
Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Jürg Alexander SchiffmannAfter obtaining his diploma in mechanical engineering from EPFL in 1999 he co-founded a start-up company dedicated to the design of gas bearing supported rotors. In 2005 he joined Fischer Engineering Solutions where he led the development of small-scale, gas bearing supported high-speed turbomachinery for fuel cell air supplies and for domestic scale heat pumps. In parallel he worked on his PhD, which he obtained from EPFL in 2008 and for which he was awarded the SwissElectric Research Award. He then joined the Gas Turbine Lab at MIT as a postdoctoral associate where he worked on foil bearings and on the experimental investigation of radial diffusers. In 2013 he was nominated assistant professor at the Ecole Polytechnique Fédérale de Lausanne where he founds the Laboratory for Applied Mechanical Design. His current research interest are in gas lubricated bearings, in aerodynamics of small-scale compressors and turbines and in automated design and optimization methodologies.
Xile HuXile Hu was born in 1978 in Putian, southeastern China. He entered the Peking University in Beijing in 1996. Besides learning too little chemistry, his biggest regret in the college was not able to correct his southern accent in Mandarin. After graduated from PKU, he went to the United States and began his doctoral studies at the University of California, San Diego. In December 2004, he finished with a Ph.D. in chemistry and some fond memories of the beautiful city of San Diego. He then moved to the Los Angeles area and become a postdoctoral scholar at the California Institute of Technology. There he enjoyed numerous stimulating scientific (and other) discussions with friends and colleagues. He also made plenty of friends outside the campus and was a frequent in many local Chinese restaurants. In 2007, after two pleasant visits to Switzerland, he decided to move across the continent one more time and join the faculty of the École Polytechnique Fédérale de Lausanne (EPFL). He now directs the Laboratory of Inorganic Synthesis and Catalysis and is interested in developing chemistry for synthesis, energy and sustainability.
Marco Cantoni1982-1988, Diploma course in Experimental Physics (certificate, 28.10.88)ETHZ Faculty IX MATHEMATICS and PHYSICS, Diploma Thesis: "Abweichungen von der ikosaedrischen Symmetrie in Al-Cu-Li Quasikristallen", Advisor: Prof. H.-U. Nissen 1989-1993, Ph.D. in Experimental Physics (certificate, 23.8.94) ETHZ Physics Department, Laboratory of Solid State Physics, Ph. D. Thesis No. 10421, Title: "Elektronenmikroskopische Untersuchung der Realkristallstruktur epitaktischer Schichten von Supraleitern des Typs SEBa2Cu3O7-x auf (100)-SrTiO3" Advisors: Prof. H.R. Ott, Prof. H. U. Nissen. 1994-1996,ETH Zürich,Material Science Department, Non-Metallic Materials, Prof. L. Gauckler: Microstructure characterisation of high-tech ceramic materials by means of SEM, TEM and atomic force microscopy: superconductor thick films (Bi-2212 on Ag) and solid oxide fuel cells (ZrO2, CeO2). 1996-1998, National Institute for Research in Inorganic Materials NIRIM, Japan Group for Special Research, Prof. S. Horiuchi: TEM of Bi-2223/Ag Tapes, Application of Imaging Plates (IP) in High Voltage TEM, Cryo-Lorentz-TEM of Superconducting Materials (Observation of Flux-Lines) 1998-2000, Ecole polytechnique fédéral de Lausanne, EPFL-CIME Centre interdépartemental de microscopie électronique CIME, Prof. P.A. Buffat: Projet 125, PPO II (programme prioritaire optique): Characterization of materials and devices for optic and optoelectronic applications by electron microscopy. 2001-2003, Ecole polytechnique fédéral de Lausanne, EPFL STI IMX LCCeramics Laboratory, Prof. Nava Setter Characterisation of ferroelectric materials, transmission electron microscopy of relaxor ferroelectric materials 2004, University of Geneva, Physics Department, Condensed matter Physics Group of Prof. R. Flükiger, TEM of Multifilament Nb3Sn superconducting wires, in collaboration with EPFL-CIME Since 1.11.04, EPFL-SB-CIME
