Publications associées à Polypropylène

Moulding and Microfluidic Wet Spinning of the Soft Polymer Optical Fibers for Sensory Applications

Polymer optical fibre (POFs) based wearable sensors have attracted a lot of attention in the field of healthcare and biomedical applications. They are in particular envision as the next generation of sensors for the continuous, real-time n ...

EPFL2024

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

Farhad Rachidi-Haeri, Marcos Rubinstein

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Thermoplastic Toughening of a Semiaromatic Polyamide with an Amino-telechelic Polyethylene

John Christopher Plummer, Holger Frauenrath, Michael Alan Giffin

Semiaromatic polyamides are used for metal replacementin advancedengineering applications to reduce weight and improve efficiency,but their range of application is limited by their inherent lack ofductility and toughness. Here, we combined semiaromatic pol ...

AMER CHEMICAL SOC2023

Recyclable flame retardant phosphonated epoxy based thermosets enabled via a reactive approach

Véronique Michaud, Valentin Rougier

The development of reusable fire-safe polymers with a prolonged lifetime heralds the switch for a transition towards circular economy. In this framework, we report a novel phosphonated thermoset which is composed of networked phosphonate esters containing ...

ELSEVIER SCIENCE SA2023

Simultaneous local sensing of two chemical properties with dual soft probe scanning electrochemical microscopy

Hubert Girault, Andreas Stephan Lesch, Gregorio Bonazza

A new method for the rapid and economic fabrication of dual soft microelectrodes for Soft-Probe-Scanning electrochemical microscopy (Soft-Probe-SECM) and their use for the simultaneous local detection of locally generated species is presented. The process ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Quantified Effects of Multiple Parameters on Inputs and Potential Sources of Microplastics from a Typical River Flowing into the Sea

Florian Frédéric Vincent Breider, Yang Liu, Wenxin Liu

As an important connection of terrestrial and marine ecosystems, rivers input multitudinous (micro)plastics into the oceans. However, comparisons of field and estimated riverine inputs of (micro)plastics and contributions of multiple parameters are limited ...

2022

Multi-recycling of polypropylene fibre reinforced concrete: Influence of recycled aggregate properties on new concrete

Hisham Tarek Mohamed Hafez

Herein, an investigation of multi-generational recyclability of polypropylene fibre reinforced concrete (PPFRC) was performed. The parent concretes were produced with 0 and 6 kg/m(3) of polypropylene fibres. After recycling, the obtained coarse recycled co ...

ELSEVIER SCI LTD2022

Tandem electrocatalytic CO2 reduction with Fe-porphyrins and Cu nanocubes enhances ethylene production

Raffaella Buonsanti, Anna Loiudice, Min Wang

Copper-based tandem schemes have emerged as promising strategies to promote the formation of multi-carbon products in the electrocatalytic CO2 reduction reaction. In such approaches, the CO-generating component of the tandem catalyst increases the local co ...

ROYAL SOC CHEMISTRY2022

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

Véronique Michaud

Nowadays the use of natural fiber composites has gained significant interest due to their low density, high availability, and low cost. The present study explores the development of sustainable 3D printing filaments based on rice husk (RH), an agricultural ...

2021

Inferring the flow properties of epithelial tissues from their geometry

Matthieu Wyart, Marko Popovic, Valentin Camille Druelle

Amorphous materials exhibit complex material properties with strongly nonlinear behaviors. Below a yield stress they behave as plastic solids, while they start to yield above a critical stress sigma(c). A key quantity controlling plasticity which is, howev ...

2021