Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Unstable flow can result in the formation of fingers during infiltration into dry soil. Centrifuge modeling is a potentially useful tool to study the relationship between finger size, spacing, and velocity. It can also be used to investigate solute transpo ...
A numerical model is presented for the simulation of complex fluid flows with free surfaces. The unknowns are the velocity and pressure fields in the liquid region, together with a function defining the volume fraction of liquid. Although the mathematical ...
Many airborne applications, such as altimetry or photogrammetry without ground control points, strongly rely on the precise evaluation of the aircraft’s attitude. This paper presents an approach to the attitude determination problem, where a system combini ...
In order to obtain target velocity in radar systems we use Doppler filters. It is usual in such applications to use window functions with prespecified shape and length. For a good target velocity estimation, it is necessary to apply adaptive length window ...
Intube evaporation tests for R-407C and R-407C/oil are reported for a microfin tube. The tests were run at a nominal inlet pressure of 6.45 bar (93.5psia) at mass velocities of 100, 200 and 300 kg/m2s (73581, 147162 and 220743 lb/h ft2) over nearly the ent ...
A piezoelectric elastic fin micromotor based on a PbZr0.53Ti0.47O3 thin film driving a micromachined silicon membrane was fabricated and studied. The stator was characterized by interferometry, and a laser set-up was used to measure the angular velocity an ...
Adsorption of cadmium (Cd) onto fine sand was investigated using batch (static) and steady flow (dynamic) experiments at pHs of 5.5, 6.0 and 6.5. For both types of experiment, adsorption of Cd onto sand was found to increase with pH. In all experiments, gr ...
Experimental test results for flow boiling of pure ammonia inside horizontal tubes were obtained for a plain stainless steel tube. Tests were run at a nominal saturation temperature of 4°C, nine mass velocities from 20- 140 kg/m2s, vapor qualities from 1-9 ...
Airborne gravimetric and altimetric measurements depend heavily on the determination of the instantaneous position and attitude of the aircraft. Here, a methodology to process raw inertial data together with GPS data collected from at least two antennas/re ...
After an experimental study of refrigerants HFC-134a, HCFC-123, HFC- 404A and HFC-407C, and considerable modifications to the test stand, LENI has undertaken a new experimental program and has assembled a large new database for evaporation of ammonia and t ...