Publications associées à Courant permanent admissible

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Following the conceptual design, the engineering design of the dc magnet and cable-in-conduit conductor (CICC) for the Super-X test facility has been done in 2021. Totally three types of conductors with different structures were designed for the three pair ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Impact of mechanical and thermal cycles at different operating conditions on the ITER toroidal field coil conductor performance

Pierluigi Bruzzone, Kamil Sedlák

The impact of electromagnetic (EM) and thermal cyclic loading (referred as warm-up-cool-down-WUCD) on the Nb3Sn cable in conduit conductors for the toroidal field magnets of the ITER tokamak should be carefully assessed for the proper operation of the mach ...

IOP PUBLISHING LTD2021

Quench Simulation of REBCO Cable-in-Conduit Conductor With Twisted Stacked-Tape Cable

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Rainer Wesche

Quench protection is a critical issue for magnet using high-temperature superconducting (HTS) materials such as REBCO. For cable-in-conduit conductor (CICC) with twisted REBCO tapes, which is considered for high-current HTS conductor for fusion magnet, the ...

2020

Design of DEMO PF Coils Based on Cable-in-Conduit Conductor

Pierluigi Bruzzone, Kamil Sedlák, Mithlesh Kumar

The poloidal field (PF) coils are designed based on the requirements defined by the EUROfusion 2015 DEMO baseline. The conductors are forced flow, NbTi cable-in-conduit. The design addresses the dimensioning of the winding pack, the electromagnetic field c ...

2019

Thermal-hydraulic modeling of a novel HTS CICC for nuclear fusion applications

Pierluigi Bruzzone

A thermal-hydraulic model has been developed for the novel cable-in-conduit conductor (CICC) recently proposed by ENEA, which foresees the use of 2nd Generation REBCO-based Coated Conductor tapes stacked into twisted grooves slotted into an Al core. A cent ...

Ieee-Inst Electrical Electronics Engineers Inc2016

Results and analysis of the hot-spot temperature experiment for a cable-in-conduit conductor with thick conduit

Pierluigi Bruzzone, Kamil Sedlák

In the design of future DEMO fusion reactor a long time constant (similar to 23 s) is required for an emergency current dump in the toroidal field (TF) coils, e.g. in case of a quench detection. This requirement is driven mainly by imposing a limit on forc ...

Elsevier Sci Ltd2015

Test of the MF-CICC Conductor Designed for the 12 T Outsert Coil of the HFML 45 T Hybrid Magnet

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov

A 45 T hybrid magnet is being built at the High Field Magnet Laboratory (HFML) of the Radboud University in Nijmegen, the Netherlands. The hybrid magnet consists of a 12 T Cable-in-Conduit-Conductor (CICC) Nb3Sn superconducting outsert, and a 33 T resistiv ...

Ieee-Inst Electrical Electronics Engineers Inc2015

Analysis of the CICC Performance Through the Measurement of the Thermal Strain Distribution of the Nb-3 Sn Filaments in the Cable Cross Section

Pierluigi Bruzzone, Ciro Calzolaio

The knowledge of the thermal strain distribution of the Nb3Sn filaments in a cable in conduit conductor (CICC) cross section is a key parameter in understanding the cable performance evolution when it undergoes electromagnetic (EM) cyclic loading. A CICC i ...

Ieee-Inst Electrical Electronics Engineers Inc2014

Results of the TFEU6 Sample Tested in SULTAN

Pierluigi Bruzzone, Boris Stepanov, Stephen Alfred March

This paper presents the results of the latest European Conductor Performance Qualification Sample for the ITER toroidal field coils. The standard qualification test was performed in the SULTAN facility at CRPP. The sample consisted of two 3.5-m lengths of ...

Ieee-Inst Electrical Electronics Engineers Inc2013

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Courant permanent admissible

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Impact of mechanical and thermal cycles at different operating conditions on the ITER toroidal field coil conductor performance

Quench Simulation of REBCO Cable-in-Conduit Conductor With Twisted Stacked-Tape Cable

Design of DEMO PF Coils Based on Cable-in-Conduit Conductor

Thermal-hydraulic modeling of a novel HTS CICC for nuclear fusion applications

Results and analysis of the hot-spot temperature experiment for a cable-in-conduit conductor with thick conduit

Test of the MF-CICC Conductor Designed for the 12 T Outsert Coil of the HFML 45 T Hybrid Magnet

Analysis of the CICC Performance Through the Measurement of the Thermal Strain Distribution of the Nb-3 Sn Filaments in the Cable Cross Section

Results of the TFEU6 Sample Tested in SULTAN

Graph Chatbot

Chattez avec Graph Search

Impact of mechanical and thermal cycles at different operating conditions on the ITER toroidal field coil conductor performance

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Quench Simulation of REBCO Cable-in-Conduit Conductor With Twisted Stacked-Tape Cable

Design of DEMO PF Coils Based on Cable-in-Conduit Conductor

Thermal-hydraulic modeling of a novel HTS CICC for nuclear fusion applications

Results and analysis of the hot-spot temperature experiment for a cable-in-conduit conductor with thick conduit

Test of the MF-CICC Conductor Designed for the 12 T Outsert Coil of the HFML 45 T Hybrid Magnet

Analysis of the CICC Performance Through the Measurement of the Thermal Strain Distribution of the Nb-3 Sn Filaments in the Cable Cross Section

Results of the TFEU6 Sample Tested in SULTAN