Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In this paper, the low-energy impact behavior of a fully biobased composite made of bio-sourced polyamide 11 resin reinforced with flax fibers was investigated. Different composite laminates were studied in order to determine the stacking sequence effects ...
Impregnation time in Resin Transfer Molding (RTM) is directly proportional to resin viscosity and inversely proportional to fabric permeability, limiting the use of high-viscosity resins with conventional reinforcements. In this study, we show how to reduc ...
Fiber reinforced polymers (FRPs) subjected to mode I fracture show important toughening due to the development of large scale bridging (LSB). Experimental studies of this phenomenon in unidirectional carbon/epoxy laminates using double cantilever beam spec ...
Structural loads, especially in-plane compression, may cause local buckling and debonding of the photovoltaic (PV) cells that are mechanically integrated with structural members and this may lead to degradation in their electrical performance. This paper p ...
This paper summarizes the strengthening of a historically significant 122-year-old roadway metallic bridge using nonprestressed bonded carbon fiber reinforced polymer (CFRP) plates. Prior to the bridge strengthening, sets of laboratory tests were conducted ...
This research validates the viability of a recycling and reusing process for end-of-life glass fiber reinforced wind turbine blades. Short glass fibers from scrap turbine blades are reclaimed and mixed with polylactic acid (PLA) through a double extrusion ...
Fatigue of structural adhesives has been investigated through joints and a little number of works investigate bulk adhesive behaviour itself. Aerospace and automotive engineering focuses more on joint configuration studies, which are correlated with practi ...
The mode I delamination behavior of a unidirectional glass-fiber reinforced polymer with a prototype elasto-plastic polyurethane matrix (GF/PU) was investigated and compared with that of glass/epoxy (GF/EP) using double cantilever beam specimens. Fracture ...
In the current study, the glass transition and tensile behavior of three different cold-curing two-component epoxies, commercially available as structural adhesives for carbon fiber reinforced polymer (CFRP) strengthening of concrete and steel structures, ...
In densely populated countries, little free land is available for the deployment of photovoltaics (PV) in field installations. In addition, 40% of the world's demand for electricity is related to buildings. These facts provide a strong argument for the acc ...