Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Empirical estimates indicate that the transient divertor power load induced by type-I ELMs in the standard H-mode ITER scenario might result in intolerably short target life times. Significant experimental effort has been put on the exploration of recipes ...
Electro Discharge Machining (EDM) is an attractive subtractive method for complex 3d structurization of hard and very hard conductive and semi-conductive materials. The machining capabilities of a material do not depend on its hardness but on its electric ...
We have studied the CB carbonaceous chondrites Queen Alexandra Range (QUE) 94411, Hammadah al Hamra (HH) 237, and Bencubbin with an emphasis on the petrographical and mineralogical effects of the shock processing that these meteorite assemblages have under ...
In this paper, dynamic models for managing durables are applied for the first time to an urban region in developing countries, i.e., Tunja in Colombia. The focus lies on the analysis of the material balance of furniture, as an example, in private household ...
Microstructural analysis and mechanical testing have been performed on two types of nanocrystalline (NC) Ni samples and compared to coarse-grained (CG) Ni. The NC electrodeposited (ED) Ni is characterized by a mean grain size of 21 nm, a narrow grain size ...
In this paper we describe the fabrication of a two-dimensional photonic band gap structure by focused electron beam induced deposition. Structure geometry is computed in order to create a light-trapping effect at 632 nm wavelength. Deposits produced using ...
This paper describes a method for modeling the natural peeling phenomenon over any 3D surface. Using crack input data—precomputed with a semi-physical solution—this method allows simulating peeling on any type of triangulated 3D object. Our model’s main ad ...
The holographic recording characteristics of phenanthrenequinone- (PQ-) doped poly(methyl methacrylate) are investigated. The exposure sensitivity is characterized for single-hologram recording, and the il M/# is measured for samples as thick as 3 mm. Opti ...
The postresonator method proposed by Hakki and Coleman for the measurement of dielectric properties of solids in the microwave region is reexamined. Based on the experiments performed around 10 GHz, the limitations of the method in loss determination for m ...
In the present study, the optimal medium perfusion rate to be used for the continuous culture of a recombinant CHO cell line in a packed-bed bioreactor made of Fibra-Cel disk carriers was detd. A first-generation process had originally been designed with a ...
