Publications associées à Polybutadiène

Thermoplastic Toughening of a Semiaromatic Polyamide with an Amino-telechelic Polyethylene

John Christopher Plummer, Holger Frauenrath, Michael Alan Giffin

Semiaromatic polyamides are used for metal replacementin advancedengineering applications to reduce weight and improve efficiency,but their range of application is limited by their inherent lack ofductility and toughness. Here, we combined semiaromatic pol ...

AMER CHEMICAL SOC2023

Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review

Sandro Carrara

There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a poss ...

MDPI2023

Slot-Die Coating of an On-the-Shelf Polymer with Increased Dielectric Permittivity for Stack Actuators

Yauhen Sheima

Nitrile-butadiene rubbers (NBR) have been extensively used as dielectric materials due to their commercial availability, excellent mechanical properties, glass transition temperature below 0 degrees C, and increased dielectric permittivity owing to the pre ...

AMER CHEMICAL SOC2022

Static and dynamic mechanical properties of nanosilica and multiwalled carbon nanotube reinforced acrylonitrile butadiene styrene composites: theoretical mechanism of nanofiller reinforcement

Thomas Keller, Harish Mohan Thettemmel

Experimental and theoretical approaches were employed to analyze the static and dynamic mechanical properties of acrylonitrile butadiene styrene (ABS) nanocomposites reinforced with multiwalled carbon nanotube (MWCNT) and nanosilica. Enhanced stiffness and ...

SPRINGER2021

Synthetic Studies toward Amanita Phalloides Toxins

Philipp Georg Werner Seeberger

Amatoxins are ribosomally synthesized and post-translationally modified bicyclic octapeptides biosynthesized by the deadly basidiomycete fungus Amanita phalloides. Amongst this group, alpha-amanitin is the most widely known toxin and is currently under inv ...

EPFL2020

Using a Data Driven Approach to Predict Waves Generated by Gravity Driven Mass Flows

Christophe Ancey, Zhenzhu Meng, Yating Hu

When colossal gravity-driven mass flows enter a body of water, they may generate waves which can have destructive consequences on coastal areas. A number of empirical equations in the form of power functions of several dimensionless groups have been develo ...

2020

Data-Driven Model for the Dynamic Characteristics of O-Rings for Gas Bearing Supported Rotors

Jürg Alexander Schiffmann, Philipp Kaspar Bättig

The measurement results of various nitrile butadiene rubber (NBR) O-Ring sizes are pre-sented, and reduced-order models are developed in order to predict the stiffness and damping coefficient as a function of O-Ring geometry, Shore hardness, squeeze, and e ...

2019

Flexible support and enhanced groove geometries for gas lubricated bearings

Philipp Kaspar Bättig

Gas lubricated Herringbone-Grooved Journal Bearings (HGJB) are a promising solution to support high-speed rotors in oil-free turbo-machinery due to their compactness, relatively low losses, no need for lubrication and low wear. Gas lubricated bearings, how ...

EPFL2019

Functional composites with damage control and repair

Amaël Maximilien Cohades

Fibre Reinforced Polymer (FRP) composite structures are subjected during service to low energy impacts or unexpected loads, leading to damage. Microcracks are generally first formed in the matrix and can reach up to several hundred microns in thickness. In ...

EPFL2018

Multiregional Satellite Precipitation Products Evaluation over Complex Terrain

Alexis Berne

An extensive evaluation of nine global-scale high-resolution satellite-based rainfall (SBR) products is performed using aminimumof 6 years (within the period of 2000-13) of reference rainfall data derived from rain gauge networks in nine mountainous region ...

American Meteorological Society2016